631327
35
Zoom out
Zoom in
Previous page
1/46
Next page
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————
34
4
Put a button between the foot and the fabric
and make sure that the needle enters the holes
without hitting the button. If it hits, see step
1.
5
At a slow speed, sew about 10 stitches.
6
Remove the material from the machine. Cut
the upper and lower threads and tie both
threads at the back of the material.
Zipper Insertion
You can use the zipper foot to sew different types of
zippers, and can easily position the zipper to the
right or left side of the needle.
When sewing the right side of the zipper, attach the
presser foot holder to the left pin of the zipper foot.
When sewing the left side of the zipper, attach the
presser foot holder to the right pin of the zipper foot.
1 Zipper foot
2 Right pin for sewing the left side of the zipper
3 Left pin for sewing the right side of the zipper
1
Set the pattern selection dial to the Straight
Stitch (center needle position (2.5 mm
(3/32")).
2
Lower the presser foot lever and fix either the
left or right pin of the zipper foot onto the
shank.
3
Fold the edge of the material 2 cm (3/4") and
place the zipper under the folded section.
4
Use the stitch width dial to adjust the needle
position.
Lower the needle into the notch on either the
left or right side of the zipper foot.
Make sure the needle does not hit the
button during sewing, otherwise the
needle may break and you may be
injured.
CAUTION
Stitch
Name
Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Foot
Straight
Stitch
2-3
(1/16-1/8)
2.5
(center
needle
position)
(3/32)
Zipper
Foot
Turn the balance wheel by hand to make
sure the needle does not hit the presser
foot before you start sewing. If you
choose a different stitch, the needle will
hit the presser foot and break the needle.
You may also be injured.
1
2
3
CAUTION
XL_01.fm Page 34 Wednesday, October 29, 2003 1:06 PM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RS-15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RS-15 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RS-15

Brother RS-15 User Manual - German - 46 pages

Brother RS-15 User Manual - Dutch - 46 pages

Brother RS-15 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info