631327
23
Zoom out
Zoom in
Previous page
1/46
Next page
KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————
22
Twin Needle Threading
You should thread each needle separately.
1
Threading the Right Needle
Follow the same instructions for threading a
single needle. See page 18 for more details.
2
Threading the Left Needle
Thread the left needle in the same way that
you threaded the right needle using the
thread from the spool on the extra spool pin,
but do not pass the thread through the thread
guide above the needle before you pass it
through the eye of the left needle.
1 Right needle thread passes through thread guide
2 Left needle thread passes in front of thread guide
3 Thread guide
Note
Models that are equipped with a Needle
Threader
You cannot use the needle threader to
thread the twin needle. Instead, thread the
twin needle by hand, from front to back.
Using the needle threader may damage the
machine.
Tension of the Thread
The tension of the thread will affect the quality of
your stitches. You may need to adjust it when you
change fabric or thread.
Memo
We recommend that you sew a scrap piece
of fabric to check the thread tension before
sewing on your project.
The basic thread tension setting is “5”.
Possible Problems If the Tension Is Wrong
Upper tension is too tight.
Locks will appear on the surface of the fabric.
Upper tension control dial
Decrease the tension by turning the dial to a
lower number.
1 Reverse
2 Surface
Upper tension is too loose.
Locks appear on the reverse side of the fabric.
Upper tension control dial
Increase the tension by turning the dial to a higher
number.
1 Reverse
2 Surface
Note
The lower thread tension has been adjusted
at the factory for general use. For most
sewing applications, no adjustment is
needed. When sewing with thin thread on
thin fabrics, the thread tension cannot be
adjusted adequately with the upper tension
control dial. Instead, the thread tension
must be adjusted according to the
procedure described below.
Lower tension is too loose.
Locks appear on the surface of the fabric.
Decrease the thread tension by turning the dial to
a lower number. If the result is still not
satisfactory, then adjust the bobbin thread tension
as explained below.
Bobbin
Increase the tension in the bobbin by turning the
screw with a small screwdriver in a clockwise
direction. However, do not turn the screw more
than one full turn.
Remember to return the screw to its original
position before starting your next project.
2
1
3
2
1
2
1
6
4
5
2
1
2
1
6
4
5
XL5000us.book Page 22 Tuesday, October 28, 2003 11:01 AM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RS-15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RS-15 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RS-15

Brother RS-15 User Manual - German - 46 pages

Brother RS-15 User Manual - Dutch - 46 pages

Brother RS-15 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info