631327
22
Zoom out
Zoom in
Previous page
1/46
Next page
21
Drawing up the lower thread
1
Raise the presser foot and the needle to their
highest positions.
2
While lightly holding the end of the upper
thread, slowly turn the balance wheel to the
front (counterclockwise) once by hand to
lower, then raise the needle.
3
The upper thread should have caught the
lower thread in a loop. Pull on the upper
thread to draw up the lower thread.
1 Upper thread
2 Lower thread loop
4
Pull out about 15 cm (6") of both threads and
put them toward the back of the machine
under the presser foot. The upper thread
should pass between the toes of the presser
foot.
1 Upper thread
2 Lower thread
Sewing with a Twin Needle
We have designed your machine so you can sew
with this needle and two top threads. You can use
the same color or two different colors of thread for
making decorative stitches.
Attaching the Twin Needle
Attach the twin needle in the same way as a
single needle (see page 7). The flat side of the
needle should face toward the back and the
rounded side should face toward you.
Attaching the Extra Spool Pin
Put the extra vertical spool pin in the hole on the
top right-hand side of the machine. Put the
second spool of thread onto the extra spool pin.
1 Extra spool pin
1
2
2
1
Use only twin needles that have been
made for this machine (part code:
X57521-001). Other needles could break,
and damage the machine.
When using the twin needle, make sure
the stitch width dial is not set above “3”
since this may cause the needle to hit the
needle plate and break.
Do not sew with bent needles. The
needle could break and cause injuries.
When using the twin needle, make sure
you use the zigzag presser foot only.
CAUTION
1
XL_01.fm Page 21 Wednesday, October 29, 2003 2:01 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RS-15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RS-15 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RS-15

Brother RS-15 User Manual - German - 46 pages

Brother RS-15 User Manual - Dutch - 46 pages

Brother RS-15 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info