718472
60
Zoom out
Zoom in
Previous page
1/63
Next page
Chapter 8
56
I want to reset the printer/delete the data
transferred from the computer.
To reset the printer, perform the following procedure:
1 Press and hold the (Power) button to turn the printer off.
2 Press and hold the (Feed) button and the (Power)
button until the POWER, STATUS and BATTERY
indicators start blinking in orange.
3 While pressing the (Power) button, press the (Feed)
button 3 times.
4 Release the (Power) button and the (Feed) button at
the same time.
All the transferred data from the computer will be deleted and
reset the printer to factory settings.
I want to cancel the current print job. Make sure that the printer is ON, and press the (Power)
button.
When printing via the USB cable, the
printer repeatedly pauses and then
continues printing.
Is the printer set for sequential printing?
If so, set print mode to buffered printing.
Windows
®
XP:
Open the printer properties from [Control Panel] - [Printers
and Other Hardware] - [Printers and Faxes] and click
[Printing Preference] button in the [General] tab. Click the
[Other] tab and choose the option [After one page of data is
received].
Windows Vista
®
:
Open printer properties from [Control Panel] - [Hardware and
Sound] - [Printers] and click [Printing Preference] button in
the [General] tab. Click the [Other] tab and choose the option
[After one page of data is received].)
Windows
®
7:
Open printer properties from [Devices and Printers],
right
-clicking the printer whose settings are to be changed, and
selecting [Printing Preference]. Choose the option [After one
page of data is received].
An error occurs when the roll cannot be
fed to the beginning of the label.
If a feed error occurs, use the Paper Size Setup to assign the
correct paper settings to the printer.
The computer program should be
sending data to the printer, but the
POWER indicator does not blink green.
Make sure that the USB cable is connected firmly and correctly.
Try using another USB cable.
Depending on whether you are using Bluetooth or Wi-Fi,
confirm that the (Bluetooth) indicator or the (Wi-Fi)
indicator is lit in blue. If it is not, check the connection.
(See Connecting the Computer and Printer uu page 21.)
Problem Solution
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RJ-4030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RJ-4030 in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RJ-4030

Brother RJ-4030 User Manual - German - 65 pages

Brother RJ-4030 User Manual - Dutch - 64 pages

Brother RJ-4030 User Manual - French - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info