718477
139
Zoom out
Zoom in
Previous page
1/153
Next page
Troubleshooting
130
14
Network Setup Problems 14
Problem Solution
You are using security software. Confirm your settings in the installer dialog box.
Allow access when the security software alert message appears during the
printer installation.
Your security settings
(SSID/Network Key) are
incorrect.
Recheck and choose the correct security settings.
The manufacturer’s name or model number of the WLAN access point/router
may be used as the default security settings.
See the instructions supplied with your WLAN access point/router for
information on how to find the security settings.
Ask the manufacturer of your WLAN access point/router or ask your Internet
provider or network administrator.
Your printer cannot connect to
the host device using Wi-Fi or
Bluetooth.
Move your printer within about one metre of the mobile device when you
configure the Wi-Fi network settings.
Move your printer to an obstruction-free area.
If a wireless computer, Bluetooth-equipped device, microwave oven, digital
cordless phone, or other device is near your printer or the wireless access
point/router, move the device away from your printer or wireless access
point/router.
Your printer cannot print using
Wi-Fi or Bluetooth.
You are using MAC Address
filtering.
You can confirm the MAC address by printing out the printer information. Press and
hold the (Feed) button on your printer to print the printer information.
Set the Wi-Fi access point/router so that the MAC address of the printer is allowed
for connections.
For more information, see the instructions supplied with your Wi-Fi access
point/router.
Your Wi-Fi access point/router is
in stealth mode (not broadcasting
the SSID).
Enter the correct SSID name during the installation or when using
[Communication settings] in the Printer Setting Tool.
Check the SSID name in the instructions supplied with your WLAN access
point/router and set up your wireless network again.
Your printer is not connected
correctly to the network.
Check the WLAN icon on the LCD.
: The network is connected correctly.
: Your printer is searching for the network.
No icon : The wireless network settings are disabled.
I have checked and tried all of the
above, but still cannot complete
the wireless configuration.
Turn your printer off and on again. Then try and configure the Wi-Fi settings again.
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RJ-2150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RJ-2150 in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RJ-2150

Brother RJ-2150 User Manual - German - 155 pages

Brother RJ-2150 User Manual - Dutch - 153 pages

Brother RJ-2150 User Manual - French - 153 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info