718477
36
Zoom out
Zoom in
Previous page
1/153
Next page
Setting Up the Printer
27
1
Infrastructure Mode 1
Infrastructure Mode allows you to connect the printer to a computer or mobile device via a Wi-Fi access
point/router.
Before You Begin
First you must configure the Wi-Fi settings of your printer to communicate with your Wi-Fi access
point/router. After the printer is configured, computers or mobile devices on your network will have access
to the printer.
Important
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation. You must confirm your Wi-Fi settings before you proceed with this
installation.
To configure the Wi-Fi settings again, or if the status of the Wi-Fi connection for your printer is unknown,
reset the Wi-Fi settings of the printer.
1 Press and hold the (Power) button to turn the printer off.
2 Press and hold the (Feed) button and the (Power) button for about three seconds. The LED
indicator starts blinking in green.
3 While pressing the (Power) button, press the (Feed) button twice.
4 Release the (Power) button.
Note
To achieve the best results with normal everyday document printing, use the printer as close to the Wi-Fi
access point/router as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your
documents.
Connecting the printer to your Wi-Fi access point/router
1 First, write down the SSID (network name) and password (network key) of your Wi-Fi access
point/router.
2 Connect the printer and computer with a USB cable.
3 On your printer, press the [Menu], [ ] button to select the [WLAN] menu, and then press the [OK]
button.
Set [On/Off] to [On].
4 Configure the Infrastructure Mode settings of the printer.
Using your printer
1 On your printer, press the [Menu], [ ] button to select the [WLAN] menu, and then press the [OK]
button.
2 Press the [ ] button to select the [Mode] menu, and then press the [OK] button.
3 Select [Infrastructure], and then press the [OK] button.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RJ-2150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RJ-2150 in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RJ-2150

Brother RJ-2150 User Manual - German - 155 pages

Brother RJ-2150 User Manual - Dutch - 153 pages

Brother RJ-2150 User Manual - French - 153 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info