718475
138
Zoom out
Zoom in
Previous page
1/153
Next page
Troubleshooting
129
14
I want to reset the printer/delete the
data transferred from the computer.
To reset the printer, perform the following procedure:
1 Press and hold the (Power) button to turn the printer off.
2 Press and hold the (Feed) button and the (Power) button for about
three seconds.
3 While pressing the (Power) button, press the (Feed) button six times.
4 Release the (Power) button.
All the transferred data from the computer will be deleted and the printer
settings will be reset to the factory settings.
I want to cancel the current print job.
Make sure that the printer is On, and then press the (Power) button.
Print head, motor, or battery is too
hot.
The thermal head, motor, or battery is too hot.
Head:
If the thermal head becomes too hot, the thermal head may produce
imaging on the paper in areas not intended to be printed. This condition is
normal when printing documents with a lot of “black” content.
The printer will stop and resume printing after the print head has cooled
down.
To avoid or delay this condition, print using a lighter density setting, reduce
the amount of black space being printed (for example, remove background
shading and colours in graphs and presentation documents), and make
sure that the printer has adequate ventilation and is not located in an
enclosed space.
Motor or battery:
Do not use the printer continuously. If the printer is used continuously, the
motor or battery will become too hot. In this case, the printer will stop and
resume printing after the motor or battery has cooled down.
Note
This condition may occur more often when the printer is used at high altitude
(more than about 3,000 m) due to a lower air density available to cool the
printer.
Printer is in boot mode. If you remove the Li-ion battery from your printer while the firmware is being
updated, your printer will restart in boot mode.
Problem Solution
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother RJ-2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother RJ-2050 in the language / languages: English as an attachment in your email.

The manual is 12,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother RJ-2050

Brother RJ-2050 User Manual - German - 155 pages

Brother RJ-2050 User Manual - Dutch - 153 pages

Brother RJ-2050 User Manual - French - 153 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info