579457
22
Zoom out
Zoom in
Previous page
1/38
Next page
20
Before You Begin
First you must configure the wireless
network settings of your printer to
communicate with your network access
point/router. After the printer is configured
to communicate with your access point/
router, computers on your network will
have access to the printer. To use the
printer from these computers, you will need
to install the drivers and software. The
following steps will guide you through the
configuration and installation process.
To achieve optimum results with
normal everyday document printing,
use the printer as close to the network
access point/router as possible with
minimal obstructions. Large objects
and walls between the two devices
as well as interference from other
electronic devices can affect the data
transfer speed of your documents.
Due to these factors, wireless may
not be the best method of connection
for all types of documents and
applications. The maximum
processing speed is possible when
using USB.
Infrastructure Mode
The following instructions are for
infrastructure mode (connected to a
computer through an access point/router).
1 Access point/router
2Your printer
3 Wireless capable computer connected to the
access point/router
4 Wired computer connected to the access point/
router
5 Smartphone
Choosing Your Wireless Install
Method
The following instructions will offer two
methods for installing your printer in a
wireless network environment. Choose the
method you prefer for your environment.
To set up your printer in any other
wireless environment, refer to the
Network User’s Guide.
Method 1
Configuration using the Installer
CD-ROM and temporarily using
a USB cable
It is recommended that you use a
computer wirelessly connected to your
network for this method.
For wireless network interface users
If you are going to connect the printer
to your network, we recommend that
you contact your system
administrator prior to installation. You
must know your wireless network
settings before you proceed with this
installation.
If you have previously configured the
printer’s wireless settings, you must
reset the network settings before you
can configure the wireless settings
again.
1 Turn the power OFF.
2 Press and hold the Cut button
while holding down the ON/OFF
button. The Wi-Fi lamp starts
flashing green and the Status
lamp lights orange.
3 Press the Cut button twice while
holding down the ON/OFF button.
The Wi-Fi lamp lights green and
the Status lamp lights orange.
2
5
4
3
1
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother QL710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother QL710 in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother QL710

Brother QL710 User Manual - English - 8 pages

Brother QL710 Installation Guide - German - 43 pages

Brother QL710 User Manual - German - 23 pages

Brother QL710 Installation Guide - Dutch - 38 pages

Brother QL710 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info