579454
38
Zoom out
Zoom in
Previous page
1/89
Next page
Reference
32
Reference
If the problems occur while using this machine, the following may help you to solve the
problems.
Potential types of problems
Problem Solution
The Brother QL label printer
does not print, or a printing error
is received.
Is the cable loose?
Check that the cable is connected securely.
Is the DK Label or DK Tape roll installed correctly?
If not, remove the DK Roll and reinstall.
Is there enough label/tape roll remaining?
Check that there is enough label/tape roll remaining.
Is the DK Roll compartment cover open?
Check that the DK Roll compartment cover is closed.
Has a print error or transmission error occurred?
Turn off the Brother Label Printer and on again if the problem
still occurs, contact Brother Customer Service at 1-877-
BROTHER.
The Status LED lamp is not lit.
Is the power cord plugged in correctly?
Check that the power cord is plugged in. If inserted, try plugging
it into another electrical outlet.
* If the power button still does not light up, contact Brother
Customer Service at 1-877-BROTHER.
The printed label contains
streaks or poor quality
characters, or the label is not fed
correctly.
Is the print head or roller dirty?
While the print head generally remains clean under normal use,
lint or dirt from the roller may become stuck on the printer head.
If this occurs, clean the roller.
For details, see
Î"Roller maintenance" in page 31.
A data transmission error
appears on the personal
computer screen.
Is the correct port chosen?
Check that the correct port is chosen from the “Print to the
following port” list in the Printer Properties dialog box.
Is the Brother Label Printer in cooling mode (the LED lamp is
flashing orange)?
Wait until the LED lamp stops flashing and then try printing
again.
Is someone printing via the network?
If you try to print while other users are printing large amounts of
data, the printer is unable to accept your print job until the
printing is finished. In such situations, execute the print job
again after the other jobs are completed.
Labels are jammed in the cutter
or are not ejected correctly after
printing.
Is there dirt or lint on the roller preventing it from rolling freely?
For details, see
Î"Roller maintenance" in page 31
The label is not ejected properly
after printing.
Check that the ejection path of the label is not blocked.
Check that the DK Label or DK Tape roll is set properly by
removing the DK Label or DK Tape roll and reinstalling
Ensure that the DK Label or DK Tape roll compartment cover is
closed properly.
The print quality is poor
Is there dirt or lint on the roller preventing it from rolling freely?
Clean the roller using the cleaning sheet (available separately).
For details, see
Î"Roller maintenance" in page 31.
After replacing the Roll while the
Add-In feature was activated, the
layout style was not updated.
Close the P-touch Editor to exit the Add-In, and reactivate the
Add-In.
3 Troubleshooting
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother QL1060N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother QL1060N in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother QL1060N

Brother QL1060N User Manual - German - 40 pages

Brother QL1060N User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info