579455
39
Zoom out
Zoom in
Previous page
1/89
Next page
33
The Add-in feature icon is not
displayed on Microsoft
®
Word.
Is Microsoft
®
Word started up from Microsoft
®
Outlook
®
?
Is Microsoft
®
Word chosen for the editor usually used for
Microsoft
®
Outlook
®
?
Due to the limitation of the program, the Add-in feature of
Microsoft
®
Word is unable to be used with the above settings.
Quit Microsoft
®
Outlook
®
, and restart Microsoft
®
Word.
Cutter error
If the cutter error occurs, keep the DK roll compartment cover
closed and press ON/OFF button. The cutter moves back to the
normal position and turns the machine OFF automatically. After
the machine is OFF, inspect the cutter unit and remove the
paper jam.
The printed bar code cannot be
read.
Set the label vertical to the print head as shown below.
Some types of scanner are not able to read the bar code. Try
using another scanner.
We recommend printing the Bar code with Print Quality options
set to "Give priority to print quality".
Windows
®
XP:
To change the Print Quality options, open the printer properties
from [Control Panel]-[Printer and other hardware]-[Printer and
Faxes], right-clicking the printer whose settings are to be
changed, then selecting [Properties]. Then, in the [General] tab,
click [Printing Preferences...].
Windows Vista
®
:
To change the Print Quality options, open the printer properties
by going to [Control Panel]-[Hardware and Sound]-[Printers],
right-clicking the printer whose settings are to be changed, then
selecting [Properties]. Then, in the [General] tab, click [Printing
Preferences...].
Windows
®
7:
To change the Print Quality options, open the printer properties
by going to -[Devices and Printers], right-clicking the printer
whose settings are to be changed, and selecting [Printer
properties]. Then, in the [General] tab, click [Preferences...].
I want to reset the printer/delete
the data transferred from PC.
(QL-1060N only)
To reset the machine, press and hold the ON/OFF button to
switch the machine OFF. Then, hold down the ON/OFF button
for two seconds. Continue holding down the ON/OFF button,
and press the CUT button six times. The machine will then
reset. All the transferred data from the PC will be deleted and
the machine will be reset to factory setting.
I want to cancel the current
printing job. (QL-1060N only)
Make sure that the printer is ON, and press ON/OFF button.
Problem Solution
Label exit slot
Recommended
print direction
Print head
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother QL1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother QL1050 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother QL1050

Brother QL1050 User Manual - German - 40 pages

Brother QL1050 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info