284
15
Zoom out
Zoom in
Previous page
1/76
Next page
11
z GETTING STARTED
QL-500/550 Components
Button descriptions
The functions of the buttons on the QL-500/550 are described below.
LED Lamp
LED lamp on the QL-500/550 indicates the current operating condition.
Button Condition
ON/OFF button Turns power to the QL-500/550 on and off.
CUT button
(QL-550 only)
Cuts the label from the DK Roll. Use this button to cut labels when the
"Auto Cut" option in the Print dialog box is unchecked.
FEED button
When using DK Die-cut Labels, feeds the DK Label Roll to the
beginning of the first label on the roll. If this button is held for more than
one second, the DK Label Roll is fed to the beginning of the next label
on the roll.
When using DK Continuous Tapes, feeds 1" (25.4 mm) of the DK Label
Roll.
If there is no DK Label Roll installed, the mode changes to a cleaning
mode and the roller rotates for 1/3" (8 mm). If this button is held for more
than one second, the roller rotates for 4" (100 mm).
Lamp Condition
Not lit
Power is OFF.
Lit
Power is ON.
(Normally lit while power is on, the LED flashes during cleaning or if an
error has occurred.)
Flashing fast
Indicates one of the following errors.
Cutter error
Label sensor error
(DK Roll not installed correctly, end of DK Roll, or label jam)
DK Roll compartment cover is open during operation
Incorrect DK Roll installed
No DK Roll installed
Flashing slow
Cooling
(Waiting for temperature of print head to lower)
Turns off after flashing
fast ten times
System error
Turn the QL-500/550 off and then on again.
If this error re-occurs, contact the retail outlet where the QL-500/550 was
purchased or your local authorized service center.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Ql-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Ql-500 in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Ql-500

Brother Ql-500 User Manual - German - 20 pages

Brother Ql-500 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info