456614
59
Zoom out
Zoom in
Previous page
1/88
Next page
50
BUTTONHOLE AND BUTTON SEWING
OJALES Y COSTURA DE BOTONES
COUTURE DE BOUTONNIÈRES ET DE BOUTONS
Making a Buttonhole
(XL5100 and PX100 only)
XL5100
Pattern Stitch Length Stitch Width Foot
PX100
1(A-B-C-D)
Buttonhole -1.5 Fixed 5
Buttonhole Foot
NOTE:
1. It is recommended to practice making a buttonhole on a scrap piece
of fabric before attempting it on the actual garment.
2. When sewing buttonholes on thin fabrics, place stabilizer material
on the underside of the fabric.
Buttonhole-making is a simple process that provides reliable results.
Making a Buttonhole
1. Using tailors chalk, mark the position and length of the buttonhole
on the fabric.
2. Attach the buttonhole foot, then slide the outside frame of the but-
tonhole foot as far back as possible.
3. The front bar tack will be sewn first. Place the fabric under the
presser foot so that the center of the front bar tack mark is directly
under the center of the presser foot and aligned with the two red
lines as shown.
1 Front of chalk mark
1
Para coser ojales
(Solo XL5100 y PX100)
XL5100
Número de puntada
Largo de Ancho de
Prensatelas
PX100 puntada puntada
1(A-B-C-D)
Ojal -1,5 Fija 5
Prensatelas
para ojales
NOTA:
1. Le recomendamos hacer una prueba de costura de ojales en un
pedazo de tela antes de empezar a hacerla en el tejido del traba-
jo.
2. Para hacer ojales en materiales finos, coloque un material esta-
bilizador debajo del tejido.
La función de costura de ojales es un proceso simple que ofre-
ce increíbles resultados.
Cosido del ojal
1. Con jaboncillo, marque la posición del ojal en el tejido.
2. Instale el prensatelas para ojales y luego deslice suavemente la
estructura exterior del prensatelas para ojales tan lejos como le
sea posible.
3. Se va a coser primero el remate de la parte delantera del ojal.
Coloque el tejido debajo del prensatelas para que el centro de la
marca del remate de la parte delantera esté directamente debajo
del centro del prensatelas y se alinee con las dos líneas rojas
como se muestra.
1 Marca del remate de la parte delantera.
Pour faire une boutonnière
(modèle XL5100 et PX100 uniquement)
XL5100
Modèle
Longueur de point
Largeur de point
Pied-de-biche
PX100
1(A-B-C-D)
Boutonnière -1,5 Fixe 5
Pied pour
boutonnières
REMARQUE:
1. Il est vivement conseillé de s’entraîner au préalable sur une chute de
tissu avant de couche la boutonnière sur le tissu souhaité.
2. Lors de la réalisation de boutonnières sur des tissus doux et légers, pla-
cer une pièce de renfort à l’envers du tissu.
Facile à réaliser, la couture automatique de boutonnières à la machine
donne des résultats très fiables.
Pour faire une boutonnière
1. A l’aide d’une craie de tailleur, marquer sur le tissu l’emplacement et la
longueur désirée de la boutonnière.
2. Installer le pied pour boutonnières et pousser le cadre extérieur du pied
à fond vers l’arrière.
3. La partie avant de la bride d’arrêt doit être cousue en premier. Placer le
tissu sous le pied-de-biche de telle manière que le milieu de la bride
d’arrêt se trouve au centre du pied-de- biche, aligné avec les deux mar-
ques rouges, comme indiqué.
1 Partie avant de la marque à la craie
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PX 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PX 300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PX 300

Brother PX 300 User Manual - German, Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info