456612

Brother PX 100 Manual

68
Zoom out
Zoom in
Previous page
1/88
Next page
59
USING ATTACHMENTS AND APPLICATIONS
USO DE ACCESORIOS Y APLICACIONES
UTILISATION DES ACCESSOIRES ET LEURS APPLICATIONS
A
B
Darning
XL5300 XL5200 XL5100
Pattern Stitch Length
PX300 PX200 PX100
223Straight Stitch Any
1. Place the darning plate on the needle plate as shown in fig. A.
1’. Lower the feed dogs by setting the drop feed lever to the up posi-
tion. (When the machine is equipped with a Drop Feed.)
2. Set the pattern selection dial to the Straight Stitch.
3. Place the portion to be darned under the presser foot together with
a fabric underlay for reinforcement.
4. Remove the presser foot and presser foot holder, then lower the
presser foot lifter.
5. Begin sewing alternating between gently drawing the work away
from you and pulling it toward you.
6. Repeat this motion until the portion to be darned is filled with par-
allel lines of stitching. (See fig. B.)
Zurcido
XL5300 XL5200 XL5100
Número de puntada
Largo de puntada
PX300 PX200 PX100
223Puntada recta Cualquiera
1. Coloque la placa de zurcido en la placa de la aguja tal y como se
muestra en la fig. A.
1’. Baje los alimentadores colocando la palanca en la posición ha-
cia arriba. (cuando la máquina está equipada con alimentación
de bajada).
2. Ponga el selector de puntada en puntada recta.
3. Ponga el tejido a zurcir debajo del prensatelas con una pieza de
tela de refuerzo debajo.
4. Retire el prensatelas y su soporte y luego bájelo.
5. Empiece a coser empujando y tirando alternativamente del teji-
do.
6. Repita la operación hasta que el zurcido se haya completado
creando unas cuantas líneas de puntadas paralelas. (Ver fig. B.)
Reprisage
XL5300 XL5200 XL5100
Modèle
Longueur de point
PX300 PX200 PX100
223Point droit
N’importe quelle longueur
1. Placer la plaque à repriser sur la plaque à aiguille, comme indiqué sur la
fig. A.
1’. Abaisser les griffes d’entraînement en mettant le levier respectif sur la
position relevée. (Lorsque la machine est équipée d’un levier d’abaisse-
ment des griffes d’entraînement).
2. Mettre le sélecteur de modèle sur le point droit.
3. Placer la partie à repriser et la pièce de renfort sous le pied-de-biche.
4. Retirer le pied-de-biche et son support puis abaisser le releveur de pied-
de-biche.
5. Commencer à coudre en donnant au tissu un mouvement de va-et-vient
(le pousser et le tirer doucement).
6. Répéter le mouvement jusqu’à ce que la partie à repriser soit remplie de
lignes de points parallèles. (Voir fig. B.)
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PX 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PX 100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PX 100

Brother PX 100 User Manual - German, Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info