456612
48
Zoom out
Zoom in
Previous page
1/88
Next page
39
STRAIGHT AND ZIGZAG STITCHING
PUNTADAS RECTAS Y ZIGZAG
POINTS DROITS ET POINTS ZIGZAG
Removing the Material From the Machine
1. Stop the machine.
2. Raise the needle to its highest position and make sure that the thread
take-up lever is also in its highest position.
3. Lift the presser foot and pull the fabric out gently to the left side.
4. Cut both threads with the thread cutter located on the left side of
the face plate.
5. To prepare the machine for the next seam, pull about 10 cm (4") of
thread through the toes of the presser foot toward the back of the
machine.
1 Thread cutter
Topstitching and Stretch Materials
The Straight Stitch (“2” on the XL5300, PX300, “2” on the XL5200,
PX200 and “3” on the XL5100, PX100) is used for topstitching and
sewing lightweight fabrics.
The Triple Stretch Stitch (“12” on the XL5300, PX300, “10” on the
XL5200, PX200 and “10” on the XL5100, PX100) is used for sewing
stretch fabrics.
1
Para retirar el tejido de la máquina
1. Pare la máquina.
2. Levante la aguja a su posición más alta y asegúrese de que la
palanca tirahilos esté también en su posición más elevada.
3. Levante el prensatelas y saque suavemente el tejido por la iz-
quierda.
4. Corte ambos hilos con el cortador que se encuentra en la parte
izquierda de la placa frontal.
5. Con el fin de dejar la máquina preparada para la próxima costu-
ra, tire unos 10 cm (4") del hilo inferior y páselo por los salientes
del prensatelas hacia la parte posterior de la máquina.
1 Cortador de hilos
Puntadas en derecho y tejidos elásticos
La puntada recta (“2” en el modelo XL5300, PX300, “2” en el modelo
XL5200, PX200 y “3” en el modelo XL5100, PX100) se utiliza para
puntadas en derecho y costura de tejidos ligeros.
La puntada triple elástica (“12” en el modelo XL5300, PX300, “10” en
el modelo XL5200, PX200 y “10” en el modelo XL5100, PX100) se
utiliza para costura de tejidos elásticos.
Pour retirer le tissu de la machine
1. Arrêter la machine.
2. Remonter complètement l’aiguille et veiller à ce que le levier releveur
soit également en position supérieure.
3. Relever le pied-de-biche et dégager doucement le tissu vers la gauche.
4. Couper les deux fils à l’aide du coupe-fils situé à gauche du capot de la
machine.
5. Afin de préparer la machine pour la couture suivante, tirer environ 10
cm de fil et le passer entre les branches du pied-de-biche, vers l’arrière
de la machine.
1 Coupe-fils
Brochure et tissus élastiques
Le point droit (“2” sur la XL5300, PX300, “2” sur la XL5200, PX200 et “3”
sur la XL5100, PX100) sert pour les travaux de haute couture et pour la
couture de tissus fins.
Le triple point élastique (“12” sur la XL5300, PX300, “10” sur la XL5200,
PX200 et “10” sur la XL5100, PX100) sert pour la couture de tissus élasti-
ques.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PX 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PX 100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PX 100

Brother PX 100 User Manual - German, Dutch - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info