613400
84
Zoom out
Zoom in
Previous page
1/111
Next page
72
Button Sewing
Pattern Stitch Length Stitch Width Foot
(Zigzag Stitch)
0 Less than 6.5
1. Measure the distance between the holes and set the appropriate
stitch width using the Stitch Width Dial. For example, if the
distance between the holes is 1.5 mm, set the stitch width to 1.5.
2. Change the foot to the Zigzag presser foot.
3. Lower the feed dogs by setting the Feed Dog Position Switch to
the Down Position as shown on page 30.
4. Place a button between the foot and the fabric and make sure
that the needle enters the holes without hitting the button. If it hits
see Step 1.
5. At a slow speed, sew approximately 10 stitches.
6. Remove the material from the machine. Cut the upper and lower
threads and tie both threads at the back of the material.
CAUTION
Make sure the needle does not strike the button during
sewing. The needle may break, leading to injury.
Zigzag Presser
Foot
Cucitura di bottoni
Punto
Lunghezza Ampiezza
Piedino
punto punto
(Punto
0
Meno di 6,5
Piedino premistoffa
zigzag)
a zigzag
1. Misurare la distanza fra i fori del bottone e regolare l’ampiezza del
punto adatta ruotando la manopola dell’ampiezza del punto. Ad
esempio, se la distanza fra i fori è 1,5 mm, regolare l’ampiezza del
punto su 1,5.
2. Rimuovere il piedino premistoffa e applicare il piedino premistoffa
a zigzag.
3. Abbassare la griffa di trasporto spostando la leva abbassa-traspor-
tatore sulla posizione abbassata, come illustrato a pagina 30.
4. Inserire il bottone fra il piedino e il tessuto accertandosi che l’ago
entri nei fori senza colpire il bottone. Altrimenti ripetere il punto 1.
5. Eseguire circa 10 punti a bassa velocità.
6. Estrarre il tessuto dalla macchina. Tagliare il filo superiore e
inferiore e legare i capi sul rovescio del tessuto.
ATTENZIONE
Assicurarsi che l’ago non colpisca il bottone durante la cucitura.
L’ago potrebbe rompersi causando lesioni personali.
Costura de botones
Modelo de Largo de Ancho de
Prensatelas
puntada puntada puntada
(Puntada
0 Menos de 6,5
Prénsatelas
zigzag) para zigzag
1. Mida la distancia entre los orificios y ajuste el ancho de puntada
correspondiente con el selector adecuado. Por ejemplo, si la distancia
es de 1,5 mm, ajuste el ancho de puntada en 1,5.
2. Cambie el prensatelas por uno para zigzag.
3. Baje los dientes de los alimentadores poniendo su palanca en la
posición baja, tal como se indica en la página 30.
4. Coloque un botón entre el prensatelas y el tejido y asegúrese de que la
aguja pase por los agujeros sin picar el botón. Si golpea el botón, véase
el punto 1.
5. Cosa unas 10 puntadas a baja velocidad.
6. Retire el tejido de la máquina. Corte los hilos inferior y superior y haga
un nudo con ambos en el revés del tejido.
PRECAUCIÓN
Asegúrese de que la aguja no roza el botón mientras cose. La aguja
podría romperse y causar lesiones.
TABLE OF CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS53 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS53 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PS53

Brother PS53 User Manual - German, Dutch, French - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info