613400
57
Zoom out
Zoom in
Previous page
1/111
Next page
45
A
B
1
2
PLACING THE EXTRA SPOOL PIN
Place the vertical spool pin in the hole found on top of the machine
near the horizontal spool pin. Place the second spool of thread onto
the vertical spool pin as shown in fig. A.
TWIN NEEDLE THREADING
Each needle should be threaded separately.
1. Threading the Right Needle
Follow the same instructions for single needle threading using
the thread from the spool on the extra spool pin. See page 39 for
more details.
2. Threading the Left Needle
Thread the left needle in the same manner that the right needle
was threaded, but do not pass the thread through the thread
guide above the needle before passing it through the eye of the
left needle as shown below in fig. B.
1 Right needle thread passes through this guide.
2 Left needle thread passes in front of this guide.
CAUTION
The needle threader can not be used. Thread the twin needle
by hand, from front to back. Using the needle threader may
result in damage to the machine.
COLOCADO EL EJE DE CARRETE SUPLEMENTARIO
Coloque el eje de carrete vertical en el orificio previsto arriba de la
máquina, cerca del eje horizontal. Instale el segundo carrete de hilo en el
eje vertical, tal como ilustrado en la fig. A.
ENHEBRADO DE LA AGUJA DOBLE
Cada una de las agujas debe ser enhebrada por separado.
1. Enhebrado de la aguja derecha
Observe las mismas instrucciones que para el enhebrado de una sola
aguja, pero utilizando el hilo del carrete colocado en el porta carretes
extra. (véase página 40 para mayores detalles al respecto).
2. Enhebrado de la aguja izquierda
Enhebre la aguja izquierda de la misma manera que la aguja derecha.
Sin embargo, no hay que pasar el hilo por la guía que se sitúa arriba de
la aguja. Conviene pasarlo directamente por el ojo de la aguja izquier-
da, tal como ilustrado arriba en la fig. B.
1 El hilo de la aguja derecha pasa por la guía.
2 El hilo de la aguja izquierda pasa delante de la guía.
PRECAUCIÓN
No utilice el enhebrador. Enhebre la aguja doble con la mano, de
delante atrás. Si usa el enhebrador, podría estropear la máquina.
APPLICAZIONE DEL PORTASPOLETTA AUSILIARIO
Inserire il portaspoletta verticale nell’apposito foro situato sulla
macchina vicino al portaspoletta orizzontale. Mettere la seconda
spoletta di filo sul portaspoletta verticale come illustrato in fig. A.
INFILATURA DELL’AGO GEMELLO
Infilare ogni ago separatamente.
1. Infilatura dell’ago destro
Seguire le stesse istruzioni relative all’infilatura dell’ago singolo
utilizzando il filo della spoletta montata sul portaspoletta ausilia-
rio. Vedere a pag. 40 per istruzioni più dettagliate.
2. Infilatura dell’ago sinistro
Infilare l’ago sinistro nello stesso modo dell’ago destro, ma non far
passare il filo per il guidafilo sopra l’ago prima di averlo infilato
nella cruna dell’ago sinistro come illustrato di seguito in fig. B.
1 l filo dell’ago destro passa per questa guida.
2 Il filo dell’ago sinistro passa davanti a questa guida.
ATTENZIONE
Non è possibile utilizzare la leva infila ago. Infilare l’ago doppio
manualmente, dalla parte anteriore a quella posteriore. L’uso della
leva infila ago può comportare danneggiamenti alla macchina.
TABLE OF CONTENTS
KNOWING YOUR
SEWING MACHINE
STRAIGHT AND
ZIGZAG STITCHING
BUILT-IN STITCHES
BUTTONHOLE AND
BUTTON SEWING
USING ATTACHMENTS
AND APPLICATIONS
MAINTENANCE
INDEX
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS53 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS53 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PS53

Brother PS53 User Manual - German, Dutch, French - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info