718659
29
Zoom out
Zoom in
Previous page
1/43
Next page
28
Questions & Answers
This chapter answers questions and offers solutions to problems that might arise when using the
product.
Symptom Cause Remedy
CD-ROM is
inserted, but
does not start
automatically.
If your computer does not
support Autorun, the main
menu will not automatically
appear after the CD-ROM is
inserted.
In this case, run “autorun.exe” in the root directory
(D:\ if the CD-ROM is loaded in drive D of the
computer) of the CD-ROM.
PS-9000 is not
found after
searching
during setup
with the
Brother
PS-9000
Utility.
Make sure that the LINK LED
is blinking. If the LINK LED is
not blinking, PS-9000 may not
be properly connected to the
network.
Check for the following, and then initialize the PS-9000 to
its factory default settings and set it up from the beginning.
•Check if the PS-9000 is turned on.
•Check if the network cable is inserted correctly
to the PS-9000.
•Check if the network cable is broken.
•Check if the LINK LED of the PS-9000 and the
Ethernet hub is blinking.
•Check if the Ethernet hub is working properly.
If communication is limited to TCP/
IP, the PS-9000 may not be found.
If a personal firewall is activated, deactivate it. If
TCP/IP filtering limitations are applied, remove them.
The print job is
not printed.
Make sure that the LINK LED
is blinking. If the LINK LED is
not blinking, the PS-9000 may
not be properly connected to
the network.
Check for the following, and then initialize the PS-9000 to
its factory default settings and set it up from the beginning.
•Check if the PS-9000 power is turned on.
•Check if the network cable is inserted correctly
to the PS-9000.
•Check if the network cable is broken.
•Check if the LINK LED of the PS-9000 and the
Ethernet hub is blinking.
•Check if the Ethernet hub is working properly.
•Check if the PS-9000 and the P-touch are
connected properly.
•Check if the USB cable is connected properly.
If you are using the TCP/IP
protocol, ping the PS-9000
with the set IP address to see if
there is any reply. If there is no
reply to pinging, the IP address
may not be set properly.
Reset the PS-9000 to its factory default settings and
set it up again from the beginning.
Example: When sending a ping in Windows
®
98
MS-DOS
Go to “Start” – “Programs” – “MS-DOS Prompt”
and run “Ping xxx.xxx.xxx.xxx”. You will see the
message below. “xxx.xxx.xxx.xxx” is the IP
address of the PS-9000.
•When there is a reply to pinging:
Reply from xxx.xxx.xxx.xxx:bytes=32
time=58ms TTL=253
Reply from xxx.xxx.xxx.xxx:bytes=32
time=58ms TTL=253
Reply from xxx.xxx.xxx.xxx:bytes=32
time=58ms TTL=253
Reply from xxx.xxx.xxx.xxx:bytes=32
time=58ms TTL=253
•When there is no reply to pinging:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS-9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-9000 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PS-9000

Brother PS-9000 User Manual - German - 44 pages

Brother PS-9000 User Manual - Dutch - 43 pages

Brother PS-9000 User Manual - French - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info