Manual Brother PS-3700 (page 78 of 90) (English, French, Spanish)

631322

Zoom out

Zoom in

1/90

MAINTENANCE

MANTENIMIENTO

ENTRETIEN

Cleaning

CAUTION

Be sure to unplug the machine before cleaning it. Other-

wise, electric shock or injury may result.

1. Remove the power supply plug from the outlet.

2. Raise the needle and the presser foot.

3. Loosen the presser foot screw and the needle clamp screw to

remove the presser foot holder and the needle. (See fig. A)

4. Remove the needle plate using a coin to remove the screws.

(See fig. B)

1 Needle clamp screw

3 Presser foot holder screw

3 Use a coin or screwdriver.

5. Turn the handwheel toward you until the notch of shuttle aligns

with the shelf of race as shown in the illustration.

4 Notch of shuttle race

5 Shelf of race

CAUTION

Be sure to turn the handwheel towards the front of the ma-

chine. Turning the handwheel in the other direction may

damage the machine.

6. Remove the race. (See fig. C)

7. Clean out lint and dust.

* Use soft fabric to clean the race. DO NOT OIL the race or shuttle.

(See fig. D)

6 Race

7 Shuttle

* DO NOT OIL.

CAUTION

• Do not use a damaged race or shuttle. Otherwise, the

thread may tangle and cause a poor finish, or the needle

may break. You can get the proper parts from your

authorized retailer.

• Be sure to insert the race in the correct position. Other-

wise, the needle may break.

8. Assemble the race first then the needle plate.

When installing the race, be sure that the notch of shuttle is in the

same position that it was when the shuttle hook was removed

and that the shelf on the race aligns with the spring.

Install the needle plate with the opening for the bobbin in the

front. Position and tighten the needle plate screws (the reverse

of its removal procedure).

8 Notch of shuttle

9 Shelf

0 Spring

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-3700 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother PS-3700 Manual

Product: