606043
28
Zoom out
Zoom in
Previous page
1/93
Next page
21
KNOWING YOUR SEWING MACHINE
CONOZCA SU MÁQUINA DE COSER
* During twin needle sewing and when sewing with
thread thicker than #30 or with nylon, metallic and
other specialty threads, cut the threads with the
thread cutter on the left side of the machine.
* After the threads are cut using the Thread Cutter
Lever, you can continue sewing without drawing
up the lower thread.
* The automatic thread cutter cannot be used when
the needle or presser foot are raised or the bobbin
winder shaft is moved to the right.
* Refer to “Automatic Thread Cutting” on page 72
if the threads become tangled or cannot be cut or
if any other problems occur while using the auto-
matic thread cutter.
Converting to
Free-arm Style
Free-arm sewing is convenient for sewing tubular
and hard-to-reach areas on a garment. To change
your machine to the free-arm style, simply lift out the
extension table.
1
Slide the extension table to the left.
1 Extension table
Conversión en modalidad
de brazo libre
La costura con brazo libre es práctica para coser
zonas tubulares y difíciles de acceso en los tejidos.
Para transformar su máquina en esa modalidad,
sólo hace falta levantar el soporte de los accesorios
y sacarlo.
1
Levante el soporte de accesorios.
2
Deslícelo hacia la izquierda para sacarlo.
1
Soporte de accesorios
1
* Si cose con aguja doble o con una aguja cuyo
grosor supera el #30 o con hilos de nylon metálico
u otros hilos especiales, corte los hilos con el
cortahilos situado en el lado izquierdo de la
máquina.
* Una vez cortados los hilos con la palanca del
cortahilos, puede seguir cosiendo sin levantar el
hilo inferior.
* El cortahilos automático no puede utilizarse
cuando la aguja o el prensatelas están levantados,
o si el eje de hacer canilla se ha desplazado a la
derecha.
* Si los hilos se enredan, si no puede cortarlos o si
aparece cualquier otro problema al utilizar el
cortahilos automático, consulte la sección
"Cortahilos automático" (pág. 72).
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS-2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-2500 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info