606043
16
Zoom out
Zoom in
Previous page
1/93
Next page
9
KNOWING YOUR SEWING MACHINE
CONOZCA SU MÁQUINA DE COSER
Replacing the Needle
1. Remove the power supply plug from the outlet.
2. Raise the needle bar to its highest position.
3. Lower the presser foot.
4. Remove the needle by loosening the needle
clamp.
5. Insert a different needle as far as possible up
against the needle stopper with its flat side facing
the back.
6. Tighten the needle clamp.
1 Use a coin or screw driver
Checking the Needle
1. The sewing needle must always be straight and
sharp for smooth sewing.
2. To check if the needle is bent, place the flat side
of the needle down as shown in the illustration.
3. Replace the needle if it is bent or dull.
1
1
Cambio de la aguja
1. Retire el enchufe de alimentación de la toma de
corriente.
2. Levante la barra de la aguja a su posición más
alta.
3. Baje el prensatelas.
4. Retire la aguja, aflojando la abrazadera de la
aguja.
5. Introduzca otra aguja, con la parte redonda cara
a usted. Hay que meterla lo más adentro posible
hasta que toque arriba con el pasador.
6. Vuelva a apretar el tornillo de la aguja.
1
Utilice una moneda o un destornillador
Verificación de la aguja
1. La aguja de costura siempre debe estar bien
recta y afilada para una buena costura.
2. Para averiguar si la aguja no está doblada, colo-
que la parte plana de la aguja hacia abajo como
muestra el dibujo.
3. Cambie la aguja si está doblada o gastada.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS-2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-2500 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info