606045

Brother PS-2300 Manual

65
Zoom out
Zoom in
Previous page
1/93
Next page
USING ATTACHMENTS AND APPLICATIONS
USO DE ACCESORIOS Y APLICACIONES
58
Zipper Insertion
Pattern Stitch Length Stitch Width Foot
2-3 0 Zipper Foot
The zipper foot is used to sew various types of
zippers and can easily be positioned to the right or
left side of the needle.
When sewing the right side of the zipper, attach the
shank to the left pin of the zipper foot. When sewing
the left side of the zipper, attach the shank to the right
pin of the zipper foot. (See fig. A)
1. Set the Pattern Selection Dial to Straight Stitch.
Set the Stitch Length between 2 and 3.
Set the Stitch Width 0.
2. Lower the presser foot lever and fix either the left
or right pin of the zipper foot onto the shank.
3. Fold the edge of the material 2 cm (3/4") and place
the zipper under the folded portion.
4. Lower the needle into the notch located either on
the left or right side of the zipper foot.
5. Sew from the bottom of the zipper toward the top
on both sides. The needle should be positioned
on the zipper side of the foot for best results. (See
fig. B)
6. To sew the opposite side of the zipper, release
the foot by pressing the button located at the back
of the presser foot, install the zipper foot on the
other side of the zipper and continue sewing
using the other side notch.
1 Zipper foot
2 Right pin for sewing the left side of the
zipper
3 Left pin for sewing the right side of the
zipper
Inserción de cremalleras
Modelo de Largo de Ancho de Prensatelas
puntada puntada puntada
2-3 0
Pata de cremalleras
La pata de cremalleras sirve para coser varios tipos
de cremalleras y puede colocarse fácilmente hacia
la izquierda o derecha de la aguja.
Cuando la cremallera se cose por el lado derecho,
instale la pata deslizándola hacia la izquierda. Cuan-
do se cose la cremallera por el lado izquierdo, instale
la pata deslizándola hacia la derecha, tal como lo
muestra la fig. A.
1. Coloque el selector de puntadas en la puntada
recta. Ajuste el largo de puntada entre 2 y 3.
Sitúe el ancho de punzada en 0.
2. Baje la palanca del prensatelas y coloque el eje
izquierdo o derecho de la pata de cremalleras en
la zanca.
3. Doble la orilla del tejido a 2 cm (3/4") y coloque la
cremallera debajo de la parte doblada.
4. Baje la aguja en la hendidura situada a la izquier-
da o derecha de la pata de cremalleras.
5. Cuesa a partir de la parte inferior de la cremallera
hacia la parte superior, por ambos lados. Para
mejores resultados, se debe colocar la aguja del
lado de la pata y de la cremallera. Véase fig. B
para mayores detalles.
6. Para coser el lado opuesto de la cremallera,
suelte la pata al apretar el botón situado en su
parte posterior, instale la pata en el otro lado de
la cremallera y siga cosiendo, pasando la aguja
por la hendidura del otro lado.
1
Pata de cremalleras
2
Eje derecho para coser la parte izquierda
de la cremallera
3
Eje izquierdo para coser la parte derecha
de la cremallera
AB
1
2
3
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PS-2300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PS-2300 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info