631318
40
Zoom out
Zoom in
Previous page
1/45
Next page
39
Cleaning
Removing the Shuttle Hook
1
Raise the needle to its highest position and
unplug the machine.
2
Remove the extension table and open the
shuttle cover on the front of the free arm.
3
Take the bobbin case out of the shuttle race
by opening and pulling the latch.
4
Slide the latch levers away from the retaining
ring to remove it.
1 Retaining ring
2 Latch lever
5
Remove the hook by grasping its center post
and pulling it out.
1 Retaining ring
2 Latch lever
3 Hook
4 Driver
5 Race body
Note
When the needle is lowered, the shuttle hook
cannot be removed.
Cleaning the Shuttle Race
1
Remove any accumulated lint and thread from
the retaining ring, hook, driver and race body
with a brush.
2
Wipe lint from the shuttle race using a cloth
dampened with machine oil.
3
Clean the shuttle hook as described in step 2.
4
When reinstalling the removed parts, hold the
retaining ring in place with the notch at the
top while pushing the latch levers back to
their original positions.
Cleaning the Feed Dogs
1
Remove the needle plate by removing the
screws with a coin.
2
Clean the upper part of the feed dogs and
shuttle race body with a brush.
1
2
5
1
2
4
3
1
XL5000us.book Page 39 Tuesday, November 11, 2003 9:25 AM
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Prestige 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Prestige 50 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Prestige 50

Brother Prestige 50 User Manual - German - 45 pages

Brother Prestige 50 User Manual - Dutch - 45 pages

Brother Prestige 50 User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info