631316
34
Zoom out
Zoom in
Previous page
1/46
Next page
33
Adjusting Buttonholes
If the stitching on the two sides of the buttonhole is
not the same, you can make the following
adjustments.
1
Set the stitch length dial to " " and sew the
buttonhole on a scrap piece of fabric to
observe how the material is fed.
2
If the right side of the buttonhole is too coarse
or fine, adjust the feeding of the material with
the Stitch Length Dial.
1 Right side
2 Shorter
3 Longer
3
After obtaining a satisfactory feeding on the
right side, stitch the buttonhole and observe
the feeding.
4
If the left side is too coarse or fine compared
with the right side, adjust the buttonhole fine
adjustment screw as described below.
If the left side is too coarse, turn the buttonhole
fine adjustment screw with a large screwdriver
in the - direction.
If the left side is too fine, turn the buttonhole
fine adjustment screw with a large screwdriver
in the + direction.
This adjustment ensures both sides of the
buttonhole are the same.
1 Stitch length dial
2 Buttonhole fine adjustment screw
3 Left side
4 In this case
Sewing Buttons
1
Measure the distance between the holes and
set the appropriate stitch width using the
stitch width dial. For example, if the distance
between the holes is 1.5 mm (1/16"), set the
stitch width to “1.5”.
2
Attach the button sewing foot.
3
Place the darning plate on the needle plate.
(On a machine equipped with a drop feed
lever, lower the feed dogs by setting the drop
feed lever to the up position.)
1
23
0
2
1
2
3
2
2
0
1
0
1
Stitch
Name
Pattern
Stitch
Length
[mm (inch)]
Stitch
Width
[mm (inch)]
Foot
Zigzag
Stitch
(1/64)
Any
Button
Sewing
Foot
3
4
4
1
2
XL5000us.book Page 33 Tuesday, October 28, 2003 11:01 AM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother Prestige 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother Prestige 200 in the language / languages: English as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother Prestige 200

Brother Prestige 200 User Manual - German - 46 pages

Brother Prestige 200 User Manual - Dutch - 46 pages

Brother Prestige 200 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info