618170
258
Zoom out
Zoom in
Previous page
1/280
Next page
APPENDIX
256
The upper thread
breaks.
Sliding surface on hook is not
smooth. There are burns on it.
1 Hook race area
Consult your nearest
authorized dealer.
The thread is loose in the hook
area.
Remove the loose thread. If the
thread is tangled in the hook,
clean the hook.
p.245
The play between the hook and
the race is too much.
Consult your nearest
authorized dealer.
The hook does not rotate
smoothly.
Remove lint, clean and apply
oil.
p.245, 250
The space between the hook
stopper and the hook cannot be
adjusted.
Consult your nearest
authorized dealer.
The upper thread is not
threaded correctly.
Pull the upper thread by hand
from below the presser foot,
and check that the thread
moves smoothly. If the thread
does not move smoothly, it is
not correctly threaded.
Un-thread the machine and
re-thread the machine.
Make sure the thread is
correctly positioned in the
needle bar thread guide.
p.55-58
Upper thread is not positioned
in upper or middle thread guide.
Make sure thread passes
completely under upper and
middle thread guide.
p.56-57
There are knots or tangles in the
thread.
Remove any knots or tangles.
The upper thread tension is too
high.
Decrease the upper thread
tension.
p.113
The lower thread tension is
incorrect.
The thread does not roll out of
the bobbin case smoothly.
Adjust the lower thread
tension.
p.112
The bobbin case is damaged.
Replace the bobbin case with a
new one.
p.33
The bobbin thread is not wound
correctly.
Check that the bobbin is
wound so that it is about 80%
full and that the thread is
evenly wound. If the bobbin is
not correctly wound, replace
the bobbin with one that is
correctly wound or rewind the
bobbin.
p.33
A bobbin designed specifically
for this machine is not used.
Use the correct bobbin. p.33
Symptom Probable Cause Remedy Reference Page
258


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR655 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR655 in the language / languages: English as an attachment in your email.

The manual is 19,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR655

Brother PR655 User Manual - German - 280 pages

Brother PR655 User Manual - Dutch - 280 pages

Brother PR655 User Manual - French - 280 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info