631314
220
Zoom out
Zoom in
Previous page
1/237
Next page
Troubleshooting 203
7
The upper thread
breaks.
The automatic needle-threading
mechanism is broken.
Consult your nearest authorized
dealer.
Adhesive is attached to the
needle.
Replace the needle. p.63
The fabric is not taut.
Firmly set the fabric in the
embroidery frame so that it is
taut.
p.28, 67
The thread quality is poor.
The thread quality is too weak
due to age of thread. Replace
thread.
The embroidery data contains
stitches with a pitch of zero.
Delete all stitches with a zero
pitch.
p.150
The embroidery data contains
many stitches with an extremely
small pitch.
Delete all stitches with a small
pitch.
p.150
The thread density of the
embroidery data is too fine.
Three or more overlapping
stitches are being sewn.
Using a data design system,
correct the thread density and
overstitching settings in the
embroidery data.
p.100
The bobbin
thread breaks.
The bobbin thread is not
correctly threaded.
Correctly thread the bobbin
thread.
p.19
The bobbin is scratched or does
not rotate smoothly.
Replace the bobbin. p.18
The bobbin case is damaged. Replace the bobbin case. p.18
The thread is tangled.
Remove the thread jammed and
clean the hook.
p.193
A bobbin designed specifically
for this machine is not used.
Use the correct bobbin. p.15
Stitches are
skipped.
The upper thread is not threaded
correctly.
Thread the upper thread
correctly.
p.35
The needle is bent or blunt.
Replace the needle with a new
one.
p.15, 63
The needle is not installed
correctly.
Correctly install the needle. p.63
Dust has accumulated under the
needle plate or in the hook.
Clean the hook and the needle
plate.
p.193, 194
The needle and the hook are not
correctly passing each other.
Consult your nearest authorized
dealer.
The thread twist is either too
tight or too loose.
Improper twisting results in
irregular loop formation. Try
using a new spool.
The embroidery
pattern is
misaligned.
The thread is tangled.
Use tweezers to remove any
tangled thread from the hook.
The fabric is not well framed in
the embroidery frame (for
example, the fabric is not taut).
If the fabric is not taut, the
pattern may become misaligned
or the stitching may shrink. Be
sure to correctly frame the fabric
in the embroidery frame.
p.28, 67
The embroidery frame is too
large for the size of the
embroidery.
Use an embroidery frame that
matches the size of the
embroidery.
p.65
Symptom Probable Cause Remedy Reference Page
Sapphire_chapt7.fm Page 203 Friday, November 18, 2005 12:10 PM
220


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR600 IIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR600 IIC in the language / languages: English as an attachment in your email.

The manual is 12,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR600 IIC

Brother PR600 IIC User Manual - German - 237 pages

Brother PR600 IIC User Manual - Dutch - 237 pages

Brother PR600 IIC User Manual - French - 237 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info