631314

Brother PR600 IIC Manual

214
Zoom out
Zoom in
Previous page
1/237
Next page
Maintenance 197
7
3
Rotate the handwheel (about 50 degrees) to
move the race of the hook to a position where
it can easily be oiled.
1 Handwheel
• Be sure to rotate the handwheel
counterclockwise.
4
Put a drop of oil onto the hook.
1 Punch a small hole in oil bottle.
2 Apply oil here.
• Use a pointed object to punch a small hole
in the tip of the enclosed oiler before using
it.
5
After oiling, insert the bobbin case into the
hook, and then close the hook cover. (Refer to
page 18.)
■ Oiling the needle bars
From embroidering screen, select one needle bar
at a time. Pull down the selected needle bar and
lock into position (refer to page 72). Put one drop
of oil on the lower needle bar felt washer.
1 Apply oil here.
• Too much oil may drip onto sewing project.
Note
● Put a drop of oil onto the hook once a day
before use.
● Apply one drop of oil on the lower needle
bar felt washer every 40 – 50 hours of
sewing time.
● Apply only sewing machine oil. Use of any
other type of oil may result in damage to the
embroidery machine.
● Do not apply too much oil. Fabric or thread
may get contaminated. If too much oil is
applied, wipe off any excess with a rag.
● If the thread breaks while sewing or the
operating noise of the hook becomes loud,
apply oil onto the race hook.
1
1
2
1
Sapphire_chapt7.fm Page 197 Friday, November 18, 2005 12:10 PM
… 214 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR600 IIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR600 IIC in the language / languages: English as an attachment in your email.

The manual is 12,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR600 IIC

Brother PR600 IIC User Manual - German - 237 pages

Brother PR600 IIC User Manual - Dutch - 237 pages

Brother PR600 IIC User Manual - French - 237 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info