631311
299
Zoom out
Zoom in
Previous page
1/320
Next page
Troubleshooting 297
7
CAUTION
There are needle
cuts or holes in
the garment.
The needle is dull.
Replace the needle. Dull
needles have a difficult time
passing through the garment,
causing fabrics to tear.
p.35, 88
The fabric is too delicate.
The simple penetration of the
needle could damage delicate
fabrics. Use stabilizer on top of
fabric.
p.250
There is
puckering in the
fabric.
The thread tension is too tight.
Adjust the tension according to
the type of fabric and thread
being used. Polyester thread
will stretch during sewing
especially if the tensions are set
too high. After the stitching is
complete, the thread returns to
its original strength, causing
puckers in the fabric.
p.123
The framing tension of the fabric
is incorrect.
Tightly frame non-stretchable,
woven fabrics. Loose framing
will cause the fabric to bunch
up under the stitching.
Tautly frame soft knits using a
stable backing. Overstretching
the garment will cause it to
look puckered when the frame
is removed.
p.249
The column stitches are too
long.
Re-digitize the design with fill
stitching or with multiple rows
of column stitching.
The needle is dull.
Dull needles push fabric down
and damage material. Replace
the needle.
p.35, 88
The design density is too heavy.
Too many stitches in an area
pull fabric, causing it to pucker.
Slightly decrease the design
density by 5% to 10%.
There is no color
indicated on LED
light after the
lights flashing,
when the thread
color needs to be
changed.
Black is assigned as the next
thread color.
When black is assigned as the
next thread color, LED light
does not indicate the next
thread color. The light turns off
after flashing.
p.113
When
embroidering
thick fabric, the
fabric cannot be
correctly hooped.
Fabric slips within the frame
because of its thickness.
Wrap masking tape or bias tape
around the outer frame. The
tape will provide resistance so
that the fabric does not easily
slip.
p. 249
There is flickering
in built-in camera
image displayed
in the LCD
screen.
If the machine is being used in a
very cold environment, there
may be flickering in the built-in
camera image displayed in the
LCD screen.
This is not a malfunction. Leave
the machine turned on, and
then wait a while before using
the built-in camera.
This machine is equipped with a thread detecting mechanism. If the machine is not
threaded with the upper thread, the machine will not operate correctly, even if the start/
stop button is pressed after unlocking the machine.
If the machine suddenly stops:
- Turn off the machine, and unplug the power cord.
- Restart the machine with the correct operating procedure. Refer to page 40.
Symptom Probable Cause Remedy Reference Page
299


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR1000e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR1000e in the language / languages: English as an attachment in your email.

The manual is 31,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR1000e

Brother PR1000e Additional guide - English, German - 2 pages

Brother PR1000e User Manual - German - 320 pages

Brother PR1000e Additional guide - Dutch - 2 pages

Brother PR1000e User Manual - Dutch - 320 pages

Brother PR1000e Additional guide - French - 2 pages

Brother PR1000e User Manual - French - 320 pages

Brother PR1000e Additional guide - Italian, Portuguese, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info