718890
205
Zoom out
Zoom in
Previous page
1/244
Next page
APPENDIX
203
7
Hooping techniques
“Use the right tool for the right job” is a statement
many of us have heard throughout the years. This
statement holds true even in the embroidery
industry. The wrong size or type of embroidery
frame may result in poor design alignment during
sewing or damage the product altogether. You can
take a perfectly created design and ruin the final
results by simply not using the correct frame size,
type or technique designed for its application.
Frame Basics
Tubular frames: This type of frame allows tubular
fabric or pre-assembled garments to be placed
around the hook assembly. It allows embroidering of
the front of a garment without stitching through the
back of it.
Cap frame: These are specialized embroidery frames
(hoops) designed to hold caps for embroidering.
Hooping fabric: The framed fabric and backing
should be perfectly flat and free of wrinkles or
bubbles. If there are bubbles or wrinkles that must
be removed, be sure that you pull on the fabric and
backing together. Pull no more than is necessary to
make the fabric flat and smooth. Overstretching the
fabric during this process may cause puckers around
the finished design when the frame is removed.
Gaps may also be generated between design parts.
Inner/outer frame positioning: There should be a
slight ridge (3 mm (1/8 inch)) of fabric and backing
below the outer frame on the back side. Tighten the
screw only if the inner frame feels loose. Avoid
overtightening the screw as this will cause puckers
in the fabric and may “strip” the screw.
When embroidering thick fabric
If the fabric slips within the frame or cannot be
correctly hooped, wrap masking tape or bias tape
around the outer frame. The tape will provide
resistance so that the fabric does not easily slip.
205


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-670E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-670E in the language / languages: English as an attachment in your email.

The manual is 11,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-670E

Brother PR-670E User Manual - German - 244 pages

Brother PR-670E User Manual - Dutch - 244 pages

Brother PR-670E User Manual - French - 244 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info