618165
212
Zoom out
Zoom in
Previous page
1/229
Next page
Troubleshooting 193
7
The upper thread
breaks.
Sliding surface on hook is not
smooth. There are burns on it.
1 Hook race area
Consult your nearest authorized
dealer.
The thread is loose in the hook
area.
Remove the loose thread. If the
thread is tangled in the hook,
clean the hook.
p.183
The play between the hook and
the race is too much.
Consult your nearest authorized
dealer.
The hook does not rotate
smoothly.
Remove lint, and clean and
apply oil.
p.183, 186
The space between the hook
stopper and the hook cannot be
adjusted.
Consult your nearest authorized
dealer.
The upper thread is not threaded
correctly.
Pull the upper thread by hand
from below the presser foot, and
check that the thread moves
smoothly. If the thread does not
move smoothly, it is not
correctly threaded.
Un-thread the machine and
re-thread the machine.
Make sure the thread is correctly
positioned in the needle bar
thread guide.
p.35-38
Upper thread is not positioned
in upper or middle thread guide.
Make sure thread passes
completely under upper and
middle thread guide.
p.36-37
There are knots or tangles in the
thread.
Remove any knots or tangles. p.84
The upper thread tension is too
high.
Decrease the upper thread
tension.
p.83
The lower thread tension is
incorrect.
The thread does not roll out of
the bobbin case smoothly.
Adjust the lower thread tension. p.18
The bobbin case is damaged.
Replace the bobbin case with a
new one.
p.15
The bobbin thread is not wound
correctly.
Check that the bobbin is wound
so that it about 80% full and that
the thread is evenly wound. If
the bobbin is not correctly
wound, replace the bobbin with
one that is correctly wound or
rewind the bobbin.
p.15
A bobbin designed specifically
for this machine is not used.
Use the correct bobbin. p.15
Symptom Probable Cause Remedy Reference Page
1
Sapphire.book Page 193 Friday, August 1, 2003 9:12 AM
212


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600C in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600C

Brother PR-600C User Manual - German - 227 pages

Brother PR-600C User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info