618165
191
Zoom out
Zoom in
Previous page
1/229
Next page
Appendix ——————————————————————————————————————————————————————————
172
Preparing the mounting jig
Lower the stopper, and then attach the mounting
jig to a stable surface, such as a desk.
1
Use a Phillips screwdriver to loosen the two
screws, and then lower the stopper in the
direction of the arrow.
1 Loosen the screw so that the stopper can be
hooked onto the screw and clamped with it.
2 Loosen until the stopper moves.
3 Stopper
2
Tighten the two screws.
Make sure that the stopper is firmly secured.
Attach the mounting jig to a stable mounting
surface, such as a desk.
3
Loosen the thumb screw for the mounting jig,
and then open the mounting bracket so that it
is wider than the thickness of the mounting
plate.
The mounting bracket can be mounted onto
a plate with a thickness from 9 mm (3/8
inch) to 38 mm (1-1/2 inches).
4
Securely clamp the mounting bracket onto the
mounting surface, and then tighten the thumb
screw.
1 Mounting bracket
2 Mounting plate
3 Tighten thumb screw
5
Check that there is no looseness.
If there is looseness, mount the mounting jig
onto the plate again
X This completes the preparation of the
mounting jig.
Note
Be sure that the mounting bracket is
securely clamped onto the mounting place
and that the thumb screw is firmly
tightened.
Do not attach the mounting jig to an
unstable surface (flexible, bent or warped).
Be careful that the mounting jig does not fall
when it is removed.
1
2
3
Sapphire.book Page 172 Friday, August 1, 2003 9:12 AM
191


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600C in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600C

Brother PR-600C User Manual - German - 227 pages

Brother PR-600C User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info