618165
159
Zoom out
Zoom in
Previous page
1/229
Next page
Basic Settings and Help Feature —————————————————————————————————————————————————
140
Using the Settings Key
Touch (settings key) to change many of the basic embroidery machine settings.
Understanding the settings screen
There are five pages in the settings screen. Touch and in the lower-right corner of the screen until
the desired page is displayed. The key and the key appear on all pages.
Page 1
1 Touch to view information about the settings
screen. A screen containing a description of the
page appears.
2 Touch to quit specifying settings. The settings are
confirmed and the screen that was displayed
before the settings key was touched appears
again.
3 The guides (embroidery frame size, centerpoint
marker, grid and cursor) for the pattern display
area can be specified.
4 The TOTAL COUNT counter shows the total
number of stitches, and the TRIP COUNT counter
show the number of stitches that have been sewn
since the machine's last maintenance.
5 The TOTAL TIME counter shows the total amount
of time that the machine has been used, and the
TRIP TIME counter shows the amount of time that
the machine has been used since its last
maintenance.
Use counters 4 and 5 as a standard for performing
periodic maintenance and for receiving maintenance
for the machine.
6 VERSION
Shows the version of the software installed on this
embroidery machine
Note
Version 1.0 is the version of the software
installed on this machine. Check with your
local authorized Brother dealer or at
www.brother.com for details on available
updates.
Page 2
7 CHANGING THE THREAD COLOR DISPLAY
The color information in the thread color
sequence display and the needle bar thread
information can be switched to the color name,
the thread color number or the sewing time, refer
to page 145.
8 DISPLAY EXPANDED THREAD COLOR
The thread colors displayed in the thread color
sequence display and in the needle bar thread
information can be displayed as a color from the
machine's built-in color thread table, as a thread
color from another manufacturer, or as a color
that is created with PE-Design ver. 5.0 as an
original color chart.
If “ON” is selected, choose from the following
three threads, refer to page 146.
Original Thread
Custom Thread 1
Custom Thread 2
9 “DST” TRIM SETTING
When using Tajima embroidery data (.dst), you
can specify whether or not connected jump
codes (stitches that become jumpstitches when
the needle is moved) are converted to trim thread
codes (stitches where sewing is stopped, the
thread is trimmed and the needle is moved). If
connected jump codes are to be converted to
trim thread codes, specify the number of
connected jump codes, refer to page 149.
0 SHORT STITCH DELETE
Specifies the pitch length of short stitches that are
to be deleted, refer to page 150.
A THREAD TAIL
Specifies the length of upper thread that remains
threaded through the needle after the thread is
trimmed (length of thread passed through the eye
of the needle), refer to page 150.
Sapphire.book Page 140 Friday, August 1, 2003 9:12 AM
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600C in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600C

Brother PR-600C User Manual - German - 227 pages

Brother PR-600C User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info