618165
62
Zoom out
Zoom in
Previous page
1/229
Next page
Sewing the Embroidery
43
2
Stopping embroidering
The machine can be stopped during sewing.
Temporarily pausing
1
Press the start/stop button.
X The machine stops and the start/stop button
lights up in red.
The thread is not trimmed.
To continue sewing, after checking that the
upper thread is taut, touch the unlock key,
and then press the start/stop button.
Memo
If the Reserve Stop key is touched while
embroidery is being sewn, the machine
stops before sewing for the next color
begins. (Refer to “Stopping the machine at
the next color change” on page 90.)
Before starting to sew, the machine can be
set to stop at any thread color change.
(Refer to “Specifying pause locations before
embroidering” on page 90.)
Resume sewing after the machine was turned off
1
Press the start/stop button.
X The embroidery machine stops and the
start/stop button lights up in red.
The thread is not trimmed.
2
Press the thread trimming button.
X The bobbin and upper threads are trimmed.
Before turning off the embroidery machine,
be sure to trim the threads.
3
Set the main power switch to “{”.
X The embroidery machine is turned off and
the display and the start/stop button
indicator go off.
Sewing can resume after the embroidery
machine is turned on again. Back up several
stitches to overlap the stitching. For details,
refer to “Resume Embroidering After Turning
Off the Machine” on page 81.
Memo
The machine can be stopped at any time,
even while it is embroidering; however, if
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued. The machine
can be set to stop when the thread color is
changed. (For details, refer to “Specifying
pause locations before embroidering” on
page 90.)
If the thread breaks while sewing
If a problem occurs while sewing, such as if the
thread breaks, the machine stops automatically.
Re-thread the broken thread, back up several
stitches, and then continue sewing. For details,
refer to “If the Thread Breaks or the Bobbin
Thread Runs Out While Embroidering” on
page 77.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Sapphire_chapt2.fm Page 43 Tuesday, August 5, 2003 1:05 PM
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600C in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600C

Brother PR-600C User Manual - German - 227 pages

Brother PR-600C User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info