618165
34
Zoom out
Zoom in
Previous page
1/229
Next page
Operating Precautions
15
2
Needle precautions
Be sure to observe the following precautions concerning the correct choice of needle for your machine.
Checking the needle
Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being
operated.
Place the flat side of the needle on a flat surface and check that the distance between the needle and the flat
surface is even. If the needle is bent or the tip of the needle is broken, replace the needle with a new one. (Refer
to “Changing the Needle” on page 61.)
Bobbin precautions
Be sure to observe the following precautions concerning the bobbin.
Your machine is designed to use household embroidery needles. The factory recommended
needle is “HAX 130 EBBR” (Organ). Schmetz needles 130/705 H-E may be used as a
substitute. Use of any other needles may break the needle or thread or damage the needle-
threading mechanism or result to injuries.
Never use bent needles. Bent needles can easily break, possibly resulting in injuries.
Only use prewound bobbin (COATS “L” type/TRU-SEW POLYESTER “Filaments”) or bobbins
designed specifically for this machine. Use of any other bobbin may result in injuries or
damage to the machine.
Use a bobbin thread that has been correctly wound, otherwise the needle may break or the
thread tension will be incorrect.
When winding the bobbin, be sure to use cotton or spun polyester bobbin thread (between 74
dtex/2 and 100 dtex/2).
CAUTION
Good needle
Bad needle
If the distance between the needle and
the flat surface is not even, the needle is
bent. Do not use a bent needle.
Needle type
marking
Flat side
Flat surface
Flat surface
CAUTION
COATS
Polyester
L
Sapphire.book Page 15 Friday, August 1, 2003 9:12 AM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600C in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600C

Brother PR-600C User Manual - German - 227 pages

Brother PR-600C User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info