618165
9
Zoom out
Zoom in
Previous page
1/229
Next page
viii
Care of CompactFlash cards
Use only 32 MB, 64 MB or 128 MB CompactFlash cards.
Do not disassemble or alter CompactFlash cards.
Do not bend, drop, scratch or place heavy objects on top of the CompactFlash cards.
Do not allow the CompactFlash cards to become wet, such as with water, solvents, drinks or any
other liquids.
Do not use or store the CompactFlash cards in a location exposed to strong static electricity or
electrical interference.
Do not use or store CompactFlash cards in locations exposed to vibrations or impacts, direct
sunlight, extreme dust (or lint), high temperatures, high humidity, severe temperature
fluctuations, or strong magnetic forces (such as from speakers).
While embroidery data is being stored or recalled from the CompactFlash card, do not allow the
machine to be exposed to vibrations or impacts, and do not attempt to remove the Compact
Flash card from the machine.
Data on the CompactFlash cards may be lost or damaged due to some malfunction or accident.
We recommend backing up important data.
Only insert or remove CompactFlash cards while appears in the display, or when
prompted to change cards by a message on the display (see page 114).
The CompactFlash card was formatted during manufacturing of this machine. We recommend
that the card not be reformatted.
For additional information, refer to the instruction manual included with the CompactFlash card that
you have purchased.
Care of floppy disks
To use floppy disks with models not equipped with a built-in floppy disk drive, purchase the floppy
disk drive separately.
Only use 2HD Windows-formatted floppy disks.
Do not disassemble the floppy disks. In addition, do not open the shutter on the floppy disk and
directly touch the disk.
Do not forcefully bend, drop, scratch or place heavy objects on top of the floppy disks.
Do not allow the floppy disks to become wet, such as with water, solvents, drinks or any other
liquids.
Do not place floppy disks near magnetic objects, such as disk drives.
Do not use or store floppy disks in locations exposed to vibrations or impacts, direct sunlight,
extreme dust (or lint), high temperatures, high humidity, severe temperature fluctuations, or
magnetic forces (such as near televisions or magnets).
While embroidery data is being stored or recalled from the floppy disk, do not allow the machine
to be exposed to vibrations or impacts, and do not attempt to remove the floppy disk from the
machine.
Data on the floppy disks may be lost or damaged due to some malfunction or accident. We
recommend backing up important data.
Store floppy disks in a dustproof, protective case.
If the magnetic head is dirty, data on floppy disks may not be read correctly. We recommend
using a commercially available cleaning disk to periodically clean the magnetic head (see
page 188).
When storing embroidery patterns on floppy disks, the floppy disks must not be write-protected.
Only insert or remove floppy disks while appears in the display, or when prompted to
change disks by a message on the display (see page 116).
*CompactFlash
TM
is a registered trademark of SanDisk Corporation in the United States and licensed
to the CompactFlash
TM
Association (CFA).
*All other company and product names mentioned with this product or in this Operation Manual are
trademarks or registered trademarks of their respective companies. However, the explanations for
markings such as
®
and
TM
are not clearly described within the text.
Sapphire.book Page viii Friday, August 1, 2003 9:12 AM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600C in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600C

Brother PR-600C User Manual - German - 227 pages

Brother PR-600C User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info