618164
217
Zoom out
Zoom in
Previous page
1/229
Next page
Appendix ——————————————————————————————————————————————————————————
198
Error messages
If the start/stop button is pressed while the machine is not correctly set up or if an incorrect operation is
performed, the machine stops and informs you of the error with a buzzer and an error message. If an error
message appears, correct the problem according to the instructions in the message.
To close the message, touch or perform the correct operation, then touch . If the message
appears again, consult your nearest authorized dealer.
The needle has stopped at an
incorrect position.
Turn the handwheel so that the
mark on the handwheel is at the
top, and then touch .
The needle bar case has
stopped at an incorrect posi-
tion.
Touch to automatically
reset the needle bar case.
The needle bar case motor is
locked.
Touch to automatically
reset the needle bar case.
The machine was stopped
while the needle bar case was
moving.
Touch to automatically
reset the needle bar case.
The needle bar case cannot be
moved to its initial position.
Touch to automatically
reset the needle bar case.
The upper thread was cut or
the thread came out the thread
tension disc or a thread guide.
The machine is not threaded
correctly.
Check that the thread is under
the upper and middle thread
guides and correctly thread the
upper thread. (Refer to
page 35.)
The bobbin thread broke or ran
out.
Check that there is thread on
the bobbin and that approxi-
mately 50 mm (2 inches) of
thread has been pulled out, and
then re-install the bobbin.
(Refer to page 19.)
A wiper error occurred.
The thread is entangled on the
wiper, remove the thread, and
then touch .
The automatic needle-thread-
ing mechanism did not operate
correctly.
The thread is entangled in the
automatic needle-threading
mechanism, remove the thread,
and then touch .
Sapphire.book Page 198 Friday, August 1, 2003 9:12 AM
217


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600 in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600

Brother PR-600 User Manual - German - 227 pages

Brother PR-600 User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info