618164
210
Zoom out
Zoom in
Previous page
1/229
Next page
Troubleshooting 191
7
The needle
breaks.
The area around the embroidery
foot hole is damaged.
1 Scratches or Burrs
Replace the presser foot.
Consult your nearest authorized
dealer.
Sliding surface on hook race is
not smooth. There are scratches
or burrs on it.
1 Hook race area
Consult your nearest authorized
dealer.
The hook is not correctly
installed.
Consult your nearest authorized
dealer.
The hook stopper is not
correctly installed, the hook is
making a complete rotation.
Consult your nearest authorized
dealer.
The upper thread is not threaded
correctly.
The upper thread is catching
somewhere.
Pull the upper thread by hand
from below the presser foot, and
check that the thread moves
smoothly. If the thread does not
move, it is not threaded
correctly. Thread the upper
thread correctly. Make sure the
thread is caught by the needle
bar thread guide.
p.35-38
The upper thread tension is set
too high. It does not run.
Decrease the upper thread
tension and make sure tension
disc rotate when pulling on
thread.
p.84
A bobbin designed specifically
for this machine is not used.
Use the correct bobbin. p.15
The needle and the hook are not
correctly passing each other.
Hook timing may be OFF.
Consult your nearest authorized
dealer.
There is backlash play (forward/
backward) in the needle bar
case.
Consult your nearest authorized
dealer.
The thread density of the
embroidery data is too fine.
Three or more overlapping
stitches are being sewn.
Using a data design system,
correct the thread density and
overstitching settings in the
embroidery data.
p.98
Symptom Probable Cause Remedy Reference Page
1
1
Sapphire.book Page 191 Friday, August 1, 2003 9:12 AM
210


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-600 in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-600

Brother PR-600 User Manual - German - 227 pages

Brother PR-600 User Manual - Dutch - 227 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info