718889
88
Zoom out
Zoom in
Previous page
1/316
Next page
86
If the needle is bent or the tip of the needle is broken, replace the needle with a new one. Use the
included Allen screw driver to replace the needle with one that is designed specifically for this machine
and that passes the test described in “Checking the needle” on page 33.
Replacing the needle
a
Turn off the embroidery machine.
b
Loosen the needle set screw and remove the
needle.
Hold the needle with your left hand, and then hold the
Allen screw driver in your right hand and turn the
needle set screw counterclockwise.
Do not apply extreme force when loosening or
tightening the needle set screw, otherwise the
machine may be damaged.
c
With the flat side of the needle toward the
back of the machine, insert the needle all
the way up until it touches the needle bar
stopper.
Pass the needle through the hole in the presser foot,
and then use the needle changing tool to lift up the
needle.
1 Needle bar stopper
2 Needle
3 Flat side of needle
4 Needle changing tool
Changing the Needle
CAUTION
Be sure to turn off the embroidery machine
before replacing the needle, otherwise injuries
may result if the machine starts sewing.
Note
Be sure to use the included Allen screw
driver to replace the needle, otherwise too
much force may be applied to the needle,
causing it to break.
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-1050X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-1050X in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-1050X

Brother PR-1050X User Manual - German - 316 pages

Brother PR-1050X User Manual - Dutch - 316 pages

Brother PR-1050X User Manual - French - 316 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info