718889
82
Zoom out
Zoom in
Previous page
1/316
Next page
80
Technical terms:
DST
This is the extension of Tajima data file (*.dst) that is
one of the data formats of embroidery patterns.
Tajima data does not contain color information,
therefore the embroidery machine automatically
assigns colors when a Tajima (.dst) file is loaded.
(Refer to page 250.)
Needle number
The needles are numbered from right to left. The far
right needle is number 1 needle. (Refer to page 7.)
Needle at the “embroidering
position”
This is the needle that is placed above the needle
hole in the needle plate. The needle bar case is
moved to position that particular needle with the
next thread color to the “embroidering position”.
Also when using the needle threader, the needle that
is going to be threaded should be moved to the
“position of embroidery”. (Refer to page 62 and
page 63.)
1 Needle hole in the needle plate
2 Needle
Wiper
This is the mechanism for pulling the thread. The
wiper pulls the thread when the needle threader is
used.
The wiper also pulls the thread from the material
when the machine trims the thread. This makes
trimming threads after embroidering un-necessary.
(Refer to page 62.)
Patterns:
Following patterns can be processed by the
machine to embroider.
- Use USB media or SD cards to transfer the
embroidery data with *.pen, *.pes, *.phc or *.dst
format to the machine.
Using the USB cable, the data can be transferred
from the PC to the machine.
- Optional embroidery cards
- Embroidery patterns created by digitizing software
program
- The patterns saved on USB media by the machine
Embroidering:
Customize the embroidery colors
- Use the thread color function by selecting either
64 colors or 300 colors, or by setting the custom
thread color table on the pattern editing screen.
For more details, see page 195 and page 197.
- Use the manual color sequence function in the
embroidering settings screen.
For more details, see page 132.
- Use the “Temporary needle bar setting” function
by selecting the key on the “Embroidering” screen.
More details please see the page 142.
Resume an unfinished pattern from
the last time the machine was
switched off.
- The machine remembers the pattern and the
position even after turning off the power. And the
machine can resume the embroidery when the
machine turns on again. (Refer to “Resume
Embroidering After Turning Off the Machine” on
page 122.)
When You Have a Question, This May Help You
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-1050X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-1050X in the language / languages: English as an attachment in your email.

The manual is 14,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-1050X

Brother PR-1050X User Manual - German - 316 pages

Brother PR-1050X User Manual - Dutch - 316 pages

Brother PR-1050X User Manual - French - 316 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info