463771
292
Zoom out
Zoom in
Previous page
1/318
Next page
APPENDIX
290
Troubleshooting
If the machine does not operate correctly, check for the following points/issues before requesting service.
If the suggested remedy does not correct the problem, contact your Brother dealer.
Symptom Probable Cause Remedy Reference Page
The embroidery
machine does not
operate.
The machine is not turned on.
Turn on the embroidery
machine.
p.40
The machine has not been
unlocked.
Touch the unlock key. p.64
The start/stop button was not
pressed.
With the machine unlocked,
press the start/stop button.
p.64
The embroidery
frame cannot be
attached to the
machine.
The embroidery frame holder
attached to the machine is not
appropriate for the selected
embroidery frame.
Select the appropriate
embroidery frame holder for
the embroidery frame.
p.90
The embroidery
frame cannot be
removed or
attached.
Depending on the position
where the machine? carriage
has stopped, it may be difficult
to remove or attach the
embroidery frame.
Touch the “Needle bar/Frame
move key” to position the
carriage, so the embroidery
frame can easily be removed or
attached.
p.90
Embroidering is
interrupted while
embroidering a
large project
using the flat,
quilt or jumbo
frame.
Embroidering is interrupted by
the presser feet not in use
catching on the fabric outside of
the design area.
Stitch the design as close to the
center of the embroidery frame
using needle bars 3 through 7,
keeping the head of the
machine as centered as
possible.
p.108, 132
The needle
breaks.
The needle is not installed
correctly.
Correctly install the needle. p.88
The needle set screw is loose.
Use the Allen screw driver to
securely tighten the needle set
screw.
p.88
The needle is bent or blunt.
Replace the needle with a new
one.
p.35, 88
The area around the hole in the
needle plate is damaged.
1 Scratches/Burrs
Replace the needle plate.
Consult your nearest Brother
dealer.
The needle hits/touches the
needle plate.
1 Needle
2 Hole in needle plate
3 Needle hits hole
Replace or consult your nearest
Brother dealer.
p.88
292


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-1000 in the language / languages: English as an attachment in your email.

The manual is 29,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-1000

Brother PR-1000 User Manual - German - 320 pages

Brother PR-1000 User Manual - Dutch - 320 pages

Brother PR-1000 User Manual - French - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info