463771
289
Zoom out
Zoom in
Previous page
1/318
Next page
Maintenance 287
7
Oiling the machine
In order to extend the life of the embroidery
machine’s parts and keep the machine operating
correctly, be sure to oil the machine before the first
time that it is used. If too little oil was applied to the
race, an error message may appear.
Afterward, put a drop of oil onto the hook once a
day before use, and put a drop of oil to the lower
needle bar felt washer every 40 to 50 hours of
machine use.
Oiling the race
1
Turn off the embroidery machine.
CAUTION
2
Open the hook cover, and remove the
bobbin case. (Refer to page 38, 39.)
3
Rotate the handwheel (about 50 degrees) to
move the race of the hook to a position
where it can easily be oiled.
1 Handwheel
Be sure to rotate the handwheel toward the
LCD panel (counterclockwise).
4
Put a drop of oil onto the hook.
1 Punch a small hole in oil bottle.
2 Apply oil here.
Use a pointed object to punch a small hole
in the tip of the included oiler before using
it.
5
After oiling, insert the bobbin case into the
hook, and then close the hook cover. (Refer
to page 38.)
Unplug the power supply cord before
cleaning the machine, otherwise
injuries or an electric shock may occur.
Front angle view Side view
289


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PR-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-1000 in the language / languages: English as an attachment in your email.

The manual is 29,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-1000

Brother PR-1000 User Manual - German - 320 pages

Brother PR-1000 User Manual - Dutch - 320 pages

Brother PR-1000 User Manual - French - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info