Manual Brother PR-1000 (page 11 of 318) (English)

463771

Zoom out

Zoom in

1/318

Machine Structure and Features 9

——

———————————————————————————————————————————

—

———————————————————————————————————————

Not all ten needles can be used to sew at the same

time. Only one needle is moved to the

embroidering position at a time. According to the

sewing order, the needle bar case is moved to the

left and right so that the needle bar and needle

thread with the required color can be moved to the

embroidering position.

1 Needle at the embroidering position

The needle is positioned over the hole in the

needle plate 2.

When starting the machine, the presser foot is

automatically lowered. The embroidery is sewn

and thread is pulled away from the material when

thread trimming and when changing thread colors

(moving to the different needles to be sewn within

the embroidery). When sewing is finished, the

machine stops. If the pattern uses eleven or more

thread colors, the machine will stop when it is

necessary for the thread spools to be changed, and

the corresponding instructions appear on the LCD.

(However, when “Manual needle bar sequences” is

set to “ON”, the machine does not automatically

stop when a thread spool must be changed. For

details, refer to “Selecting/Managing Thread Colors

for Each Needle Bar (Manual Color Sequence)” on

page 132.)

Differences from single-needle

machines

■ Can sew embroidery patterns using ten or less

colors without the need to replace the thread

spools

With single-needle machines, the thread spool

must be changed and the machine must be

threaded each time a different thread color is

used. With this machine, it is not necessary to

change the thread spool or rethread the machine

with embroidery patterns containing ten or less

colors. If total colors are less than ten colors, and

if total color change is more than eleven times,

machine will come back to the needle that the

machine is already used and sew the same color

again automatically.

■ Automatic sewing reduces sewing time

Except to change the thread spools with patterns

containing eleven or more colors, once the

machine is started, it continues to operate

automatically, from lowering the presser foot to

performing the specified operations at the

starting and end positions in addition to

changing the thread colors. Since the machine

can change threads and finish stitching, sewing

time is reduced.

■ Automatically pulls and holds the thread tails to

the under side of fabric at the beginning and

end of stitching

Since the machine automatically pulls the upper

thread under the fabric at the beginning of a

color, and pulls the upper thread from the fabric

at the time of thread trimming, you don’t need to

deal with the upper thread tail at all.

■ Automatically moves the embroidery frame to

the embroidering position

With a single-needle machine, in most cases,

the embroidery pattern is centered in the frame

and the fabric must be correctly positioned

within the embroidery frame with the center of

the desired embroidering position aligned with

the center of the embroidery frame. However,

with 10 needle embroidery machine, the

embroidery frame is moved to determine the

embroidering position, making it easier to sew

the pattern at any place in the frame. In addition,

the embroidering position can be freely

determined manually as well as with the camera

positioning function after the fabric is hooped

and the embroidery frame is attached to the

machine, regardless of how the fabric is

positioned in the embroidery frame.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brother PR-1000 in the language / languages: English as an attachment in your email.

The manual is 29,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PR-1000

Brother PR-1000 User Manual - German - 320 pages

Brother PR-1000 User Manual - Dutch - 320 pages

Brother PR-1000 User Manual - French - 320 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brother PR-1000 Manual

Product: