718469
36
Zoom out
Zoom in
Previous page
1/166
Next page
Setting Up the Printer
28
1
The Printer Setting Tool also allows you to easily apply the network settings changes to multiple printers.
(See Applying Setting Changes to Multiple Printers on page 63 when using Windows
®
PCs or page 89
when using Mac computers.)
You can find the serial number label on the back of the printer or in the battery cavity.
You can also confirm the serial number by printing the printer settings (see Confirm the Printer Settings
on page 91).
You cannot connect to the Internet via Wi-Fi while using Wireless Direct. To use the Internet, use a wired
connection (when a computer is connected), or connect using Infrastructure Mode.
Infrastructure Mode 1
Infrastructure Mode allows you to connect the printer to a computer or mobile device via a Wi-Fi access
point/router.
Before You Begin
First you must configure the Wi-Fi settings of your printer to communicate with your Wi-Fi access
point/router. After the printer is configured, computers or mobile devices on your network will have access
to the printer.
Important
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation. You must confirm your Wi-Fi settings before you proceed with this
installation.
To configure the Wi-Fi settings again, or if the status of the Wi-Fi connection for your printer is not clear,
reset the Wi-Fi settings of the printer.
1 Confirm that the printer is turned off.
2 While holding down the (Feed) button, press the (Power) button three times, and then release the
(Feed) button.
The POWER indicator starts flashing in orange.
3 Press the (Feed) button once.
Note
To achieve the best results with normal everyday document printing, use the printer as close to the Wi-Fi
access point/router as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your
documents.
Connecting the printer to your Wi-Fi access point/router
a First, write down the SSID (network name) and password (network key) of your Wi-Fi access
point/router.
b Connect the printer and computer with a USB cable.
c Press and hold the (Wi-Fi) button on your printer for one second to turn the Wi-Fi function on.
The (Wi-Fi) indicator starts flashing in blue once every three seconds.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-773 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-773 in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PJ-773

Brother PJ-773 User Manual - German - 168 pages

Brother PJ-773 User Manual - Dutch - 167 pages

Brother PJ-773 User Manual - French - 167 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info