718903
39
Zoom out
Zoom in
Previous page
1/75
Next page
Using the Printer
35
2
Setting Printer Driver
Options
2
When printing from a computer program,
various printing options can be selected using
the printer driver.
Paper Type 2
Available settings: [Cut Sheet], [Roll],
[Perforated Roll], [Perforated Roll Retract]
Default setting: [Cut Sheet]
Set this option to match the type of paper that
is loaded.
Density 2
Available settings: [0]-[10], [Printer Setting]
1
Default setting: [6]
1
This option controls the print density, which
affects the darkness of the printed document.
A lower value produces lighter print; a higher
value produces darker print.
1
[Printer Setting] is the default setting ([6]) or the
setting specified in the Brother PJ-673 Utility.
Darker print uses more battery power,
but may be easier to read if the font or
the document contains many narrow lines.
If battery life is important, select a lower
value.
2-ply Mode 2
Available settings: [Thermal Paper],
[Thermal Copy Paper]
Default setting: [Thermal Paper]
This option is used when 2-ply paper is
loaded. When [Thermal Copy Paper] is
selected, the printer produces prints that are
darker (and print slower) than when [Density]
is set to 10.
Page Feed Mode 2
Available settings: [No Feed], [Fixed Page],
[End of Page], [End of Page Retract]
Default setting: [Fixed Page]
This option determines how paper is ejected;
and controls how the printer responds to form
feed commands.
No Feed - Paper is not fed at the end of
a job. Because additional paper is not
ejected when at the end of the document,
this setting is useful when using
non-perforated roll paper.
Fixed Page - Paper is fed at the end
of a job to suit the vertical length of the
selected page size (i.e., letter, legal, A4,
or user-defined size). Select this setting
when using cut sheet paper.
End of Page - Paper is fed until the printer
detects that no paper remains in the input
slot, or until 14" (355.6 mm) of paper has
been fed. Select this setting when using
perforated paper.
End of Page Retract - Paper is fed until
the paper sensor detects a pre-printed
end-of-page mark on the paper or the end
of the sheet. When this setting is selected,
set [Paper Type] to [Perforated Roll
Retract].
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-673 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-673 in the language / languages: English as an attachment in your email.

The manual is 9,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PJ-673

Brother PJ-673 User Manual - German - 76 pages

Brother PJ-673 User Manual - Dutch - 75 pages

Brother PJ-673 User Manual - French - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info