718901
53
Zoom out
Zoom in
Previous page
1/61
Next page
Troubleshooting
49
7
Pages Don’t Print 7
The image for one page requires more or
fewer sheets than you expected
Make sure that the computer program, the printer, and the
printer driver have been set to match the paper size of the
paper that is loaded in the printer. If the computer program or
printer driver has been set to print legal-size paper and you
insert letter-size paper, the image will require two sheets.
Adjust settings in the computer program or the printer driver’s
dialogue box as needed or reduce the size of the print image to
fit on a letter-size page.
The DATA indicator remains lit in green if data is still in the
printer after the page has completed printing.
The side margins are incorrect Make sure that the correct margins have been set in PJ-600
Series Utility and the computer program. Adjust the left margin
as needed.
Make sure that the computer program, the printer, and the
printer driver have been set to match the paper size of the
paper that is loaded in the printer. If the computer program or
printer driver has been set to a different width of paper, the
image will not print in the correct horizontal position. Adjust the
settings as needed.
The printed page does not contain the
correct characters
Make sure that you have defined the correct character set (font)
in the computer program. Change the character set if
necessary.
Try changing the font used in the document.
The printed page contains random dots Check the printer driver to make sure that it is set correctly.
Make sure that the USB cable is connected firmly and correctly.
Try using another USB cable.
Problem Solution
The DATA indicator remains lit in green
but the printer does not print
The printer has not printed all the data received.
If no paper is loaded, insert a new sheet of paper. If paper is
loaded, remove the paper and insert it again. The printer should
start printing.
If the printer does not start printing, turn the printer off and back
on, and then print the document again.
The problem may occur when sending simple ASCII text data
to the printer. If a line of text is missing a CR/LF or form feed at
the end of the line, the printer may be waiting for more data. Try
printing another page, or pressing the (Feed) button to
manually form feed.
The computer program should be
sending data to the printer, but the DATA
indicator light stays on green
Make sure that the USB cable is connected firmly and correctly.
Try using another USB cable.
Problem Solution
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-662 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-662 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PJ-662

Brother PJ-662 User Manual - German - 67 pages

Brother PJ-662 User Manual - Dutch - 65 pages

Brother PJ-662 User Manual - French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info