718900
49
Zoom out
Zoom in
Previous page
1/61
Next page
Reference
45
6
Head or motor is cooling down The thermal head or motor is too hot.
Head:
If the thermal head becomes too hot, it may produce imaging
on the paper in areas not intended to be printed. This condition
is normal when printing documents with a great deal of “black”
content.
The printer will stop and resume printing after the print head
has cooled down.
To avoid or delay the onset of this condition, print using a lighter
density setting, reduce the amount of black space being printed
(for example, remove background shading and colours in
graphs and presentation documents), and make sure that the
printer has adequate ventilation and is not located in an
enclosed space.
Motor:
Do not use the printer continuously. If the printer is used
continuously, the motor will become too hot. In this case, the
printer will stop and resume printing after the motor has cooled
down.
Note
This condition may occur more often when the printer is
used at high altitude (more than 3,048 m (10,000 feet)) due
to a lower air density available to cool the printer.
Data reception error Data is not being received properly, most likely because of a
poor IrDA connection.
Reposition the printer and/or IrDA port on the computer and try
again.
Printer is in boot mode The AC adapter was unplugged while the firmware was being
updated, and the printer started up in boot mode the next time
it was started.
Contact your reseller or Brother Customer Service for
assistance.
Problem Solution
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-623 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-623 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PJ-623

Brother PJ-623 User Manual - German - 67 pages

Brother PJ-623 User Manual - Dutch - 65 pages

Brother PJ-623 User Manual - French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info