718900
38
Zoom out
Zoom in
Previous page
1/61
Next page
Chapter 3
34
Defining Print Density and Other Options 3
1 Print Density
Available settings: [0]-[10]
Default setting: [6]
This parameter determines print density, which
affects the darkness of the printed document. A
lower value produces lighter print; a higher
value produces darker print.
Darker print uses more battery power, but may
be easier to read if the font or other document
content is made up of narrow lines. If battery
conservation is important, select a lower value.
Note
If this parameter is changed in the printer
driver’s dialogue box, that setting has priority.
2 Form Feed Mode
Available settings: [No Feed], [Fixed Page],
[End of Page], [End of Page Retract]
Default setting: [Fixed Page]
This parameter determines how paper is
ejected; it determines how the printer responds
to form feed commands received from any
source.
No Feed - Paper is not fed at the end of a
job. Because additional paper is not
ejected when at the end of the document,
this setting is useful when using
non-perforated roll paper.
Fixed Page - Paper is fed at the end of a
job to suit the vertical length of the selected
page size (i.e., letter, legal, A4, or
user-defined size). Select this setting when
using cut sheet paper.
End of Page - Paper is fed until the printer
detects that no paper remains in the input
slot, or until 14" (355.6 mm) of paper has
been fed. Select this setting when using
perforated paper.
End of Page Retract - Paper is fed until the
paper sensor detects a pre-printed
end-of-page mark on the paper or the end
of the sheet. When this setting is selected,
set [Paper Type] to [Perforated Roll
Retract].
Note
If this parameter is changed in the printer
driver’s dialogue box, that setting has priority.
3Pre-Feed
Available settings: [Disable], [Enable]
Default setting: [Disable]
If [Enable] is selected, the printer ejects a short
length of paper when the printer turns on.
When using perforated roll paper or roll paper
that is pre-printed, we recommend setting this
parameter to [Disable].
4 CR-LF Mode
Available settings: [LF=LF CR=CR],
[LF=CR+LF CR=CR+LF]
Default setting: [LF=LF CR=CR]
This parameter determines how the printer
responds when LF and CR commands (ASCII
characters 10 and 13) are received. By default,
the print head advances to the next line for an
LF (line feed) command, and the print head
returns to the left margin for a CR (carriage
return).
1
2
3
4
5
6
7
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-623 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-623 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PJ-623

Brother PJ-623 User Manual - German - 67 pages

Brother PJ-623 User Manual - Dutch - 65 pages

Brother PJ-623 User Manual - French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info