718898
47
Zoom out
Zoom in
Previous page
1/66
Next page
Page 43
Chapter 4 - Maintaining the Printer
Cleaning the Print Head
To maintain high print quality, clean the print head after 500 prints or whenever you
detect broken or light characters on the page.
NOTE: Defective or wrinkled paper can also cause broken or light characters. If
the problem does not go away after you clean the print head, try a different
sheet of paper or a higher density setting.
1. Make sure the printer is powered on without paper loaded.
NOTE: If paper is loaded and detected by the printer when you attempt
to initiate Cleaning Mode, a Form Feed will be executed instead.
2. Press the main switch for about two seconds. The “Data” LED will
illuminate.
3. Press the main switch again for less than 2 seconds. The feed motor will
begin to turn.
4. Insert the black cleaning cloth that came with the printer into the
printers paper input slot with the rough black side, which contains the
cleaning material, towards the rear of the printer. See Figure 17.
The printer pulls the cleaning cloth through.
5. The roller movement will stop automatically after about 60 seconds, and
the printer returns to an idle state. If you press the main switch before
60 seconds has elapsed, this will toggle the feed motor on and off.
Pressing the main switch twice quickly will shut off the printer.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-563 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-563 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info