718896
60
Zoom out
Zoom in
Previous page
1/66
Next page
Page 56
The top margin is incorrect
Make sure the correct margins have been set in the con guration utility and your
software application. If not, set the margins for the top and bottom of the page
as needed.
Make sure you are not inserting the paper into the paper input slot with excessive force.
Always insert the paper gently.
The image for one page requires more or fewer sheets than you
expected
Make sure the software application, the printer, and printer driver have been set to print
the same size paper that you are loading into the printer. If the application or printer
driver has been set to print legal-size paper and you insert letter-size paper, the image
will require two sheets. Adjust the application or printer driver settings as needed or
reduce the print image within your application to t on the letter-size page.
The data light will remain lit green to indicate that data is still in the printer after the
page has completed printing.
The side margins are incorrect
Check to make sure the correct margins have been set in the con guration utility and
your software application. Adjust the left margin as needed.
Make sure the software application or the printer driver has been set to print the same
size paper that you are loading into the printer. If the application or printer driver
has been set to print a different width paper, the image will not print in the proper
horizontal position. Adjust the application or printer driver as needed.
The print does not contain the proper characters
Make sure you have de ned the proper character set (font) in the software application.
If it is not correct, you must change it.
Trying another font may tell you if the original font was in error.
The print contains random dots
Check the printer driver to make sure it is set correctly. Check the interface cable to
make sure it is connected rmly and correctly. If possible, replace the interface cable
with another and permanently replace it if it is defective.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PJ-523 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PJ-523 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info