555865
183
Zoom out
Zoom in
Previous page
1/320
Next page
181
Transferring Data
Using the Link Function to Embroider From the Computer
Changing the embroidery
machine name appearing with the
Link function
1. Click Machine Name in the Option menu of
the queue whose name is to be changed.
2. Type the name in the Machine Name box,
and then click OK.
b Memo:
The embroidering order of designs in the
queue can be changed.
c
For details, refer to “If multiple
designs were sent to a single
machine” on page 179.
If additional machines are connected while
the
Link
dialog box is displayed,
corresponding queues will appear. If a
machine is disconnected, the
corresponding queue will disappear.
To display the
Property
dialog box for a file,
double-click the file’s icon, or click a file to
select it, right-click it, and then click
Property
from the menu that appears.
To reduce this dialog box to a button on the
taskbar, click the
Minimize
button.
To disconnect the USB cable, or shut
down the computer
After data transferring to embroidery
machine and the
transferring
message on
the screen of the machine is closed, you
can disconnect the USB cable, or shut
down the computer.
When connected to the embroidery
machine again, you can continue the Link
operation.
The embroidery machine can finish sewing
the design currently being embroidered
even if the computer is turned off.
If the embroidery machine is turned off
while it is embroidering, the resume
operation can be used the next time it is
turned on. At that time, transmission can be
resumed using the Link function by clicking
Link
in Design Database or in the
Option
menu of Layout & Editing to display the
Link
dialog box.
If the embroidery machine connection
cannot be detected, the
Link
dialog box will
close automatically.
To display the
Link
dialog box again after
the computer has been restarted, click
Link
in Design Database or in the
Option
menu
(in the upper-right corner) of Layout &
Editing.
To display the
Distributor
dialog box, click
Distributor
in the
Option
menu of the
Link
dialog box.
b Memo:
A name (up to 10 alphanumeric characters/
symbols) can be specified for the embroidery
machine.
a Note:
When an embroidery machine is
connected to the computer, the
embroidery machine is recognized by the
computer as a removable disk and is
assigned a drive letter. If this drive letter
is the same as one that has already been
assigned by the computer, designs
cannot be sent from the computer to that
embroidery machine. This problem
occurs, for example, if a network drive
has been assigned a computer drive
letter. If this occurs, cancel the
assignment for the drive with the
conflicting drive letter.
When the number of embroidery
machines connected to the computer via
USB is increased, the operating system
may require that the computer be
restarted. At that time, restart the
computer.
XE8656-001.book Page 181 Monday, May 24, 2010 5:44 PM
183


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PeDesign Next at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PeDesign Next in the language / languages: English as an attachment in your email.

The manual is 36,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PeDesign Next

Brother PeDesign Next User Manual - Dutch - 328 pages

Brother PeDesign Next User Manual - French - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info