644312
2
Zoom out
Zoom in
Previous page
1/2
Next page
Please Read Before Installation
Before beginning the installation, check that the computer meets the system requirements.
In order to install the software on Windows
®
operating system, you must log on to the computer using an account with administrator
privileges. If you are not logged on with the administrator account, the password for the administrator account may be requested
with Windows
®
. Type in the password to continue the procedure. For details on logging on to the computer using an account with
administrator privileges, refer to the Windows
®
manual.
The installation procedure is described for Windows
®
10. The procedure and dialog boxes for other operating systems may be slightly
different.
If the installation is canceled before it is completed or if the procedure is not performed as described, the software will not be installed
correctly.
Do not remove the “PE-DESIGN Software Key” from the USB port of the computer while the installation is being performed. Remove
the “PE-DESIGN Software Key” after the installation is completed.
Before beginning the installation, follow the procedure below to back up the installer onto your computer.
Create a backup folder on the computer.1)
Copy the entire 2) [PE-DESIGN PLUS2] folder from the “PE-DESIGN Software Key” into the folder created in step 1).
Do not delete the data in the [PE-DESIGN PLUS2] folder on the “PE-DESIGN Software Key”.
System Requirements
Before installing the software on your computer, make sure that the computer meets the following minimum PC requirements.
Operating system Windows Vista
®
, Windows
®
7, 8.1, 10 (32 or 64 bit)
Processor 1 GHz or more
Memory 512 MB (1 GB or more is recommended.)
Hard disk free space 300 MB
Monitor XGA (1024 × 768), 16-bit color or higher
Port Two or more USB ports (used for connecting the “PE-DESIGN Software Key” and for transferring embroidery
data to an embroidery machine)
Device Mouse
Printer Graphic printer that is supported by your system (if you wish to print your images)
Internet access Required for updating PE-DESIGN
This product may not operate correctly with some computers.
Installing the Software
Plug the “PE-DESIGN Software Key” into the USB port on 1
the computer.
Open the [2 PE-DESIGN PLUS2] folder, and then double-click
the [setup.exe] le.
The [ User Account Control] dialog box appears.
Click [
3 Yes].
After a short while, the following dialog box automatically
appears.
Select the desired language, and then click [
4 OK].
The [ InstallShield Wizard] starts up, and the rst dialog
box appears.
Click [
5 Next] to continue with the installation.
A dialog box appears, allowing you to select the folder
where the software will be installed.
Check the installation location, and then click [
6 Next].
To install the application into a different folder:
Click [1) Change].
In the [2) Change Current Destination Folder] dialog box
that appears, select the drive and folder. (If necessary,
type in the name of a new folder.)
Click [3) OK].
The [ Destination Folder] dialog box of the
[InstallShield Wizard] shows the selected folder.
Click [4) Next] to install the application into the selected
folder.
A dialog box appears, indicating that preparations for
installation are nished.
Click [
7 Install] to install the application.
When the installation is completed, the following dialog
box appears.
Select the [
8 Launch PE-DESIGN PLUS2] check box, and
then click [Finish]. This completes the installation and starts
up PE-DESIGN PLUS2.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother PE-DESIGN PLUS 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother PE-DESIGN PLUS 2 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother PE-DESIGN PLUS 2

Brother PE-DESIGN PLUS 2 User Manual - English - 120 pages

Brother PE-DESIGN PLUS 2 User Manual - German - 120 pages

Brother PE-DESIGN PLUS 2 User Manual - Dutch - 120 pages

Brother PE-DESIGN PLUS 2 User Manual - French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info